G'day Andrew,
No, infact the L20B is just about to get some match porting, a bit more
compression and if I can afford it some bigger inlet valves. This should
give me a few more HP to tackle the competition in the MSCA sprint series. I
was at Phillip Island on Sat and had the car on two wheels up over Lukey
heights, real scary! Next event is Winton 31/3 and 1/4, if anyone is up that
way come and say hello.
I am also after some 270mm disks from the later version of the 240K (the
type that has single piston calipers). I will be using the twin piston
simitomos with these disks.
The FJ 20 DET is more of a long term project when overtime is available to
pay for the accessories (motec, I/C etc) . I hope to have it running on the
track in my other 1600 by the end of the year.
Regards
Trev
-----Original Message-----
From: Andrew Greenbury [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, 13 March 2001 16:00
To: [EMAIL PROTECTED]
Subject: RE: FJ injectors
trev
are you ditching the L20 in the race car???
andrew
> List,
>
> I am setting up a fuel system for an FJ 20 DET.
> Anyone know how much FJ 20 DET injectors flow and at what fuel pressure?
> I've heard Bosch 0 280 150 036 are the go. On autospeed they say they are
> good for 380cc/min and 76HP each. Apparently if you increase fuel pressure
> they flow enough for 100HP? Is that true? What do other people run in
their
> modified FJ20's? I want to spec the fuel system to be able to run
350-400HP.
>
> I am also after info on how to test fuel injector flows and fuel pumps.
>
> Thanks
> Trev
>
>
> -----Original Message-----
> From: HB [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, 8 March 2001 15:23
> To: [EMAIL PROTECTED]
> Subject: Re: FJ injectors
>
>
> l have a spare set if you need them, how much do you think they are worth?
> ----- Original Message -----
> From: simon waterhouse <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Wednesday, March 07, 2001 8:26 AM
> Subject: FJ injectors
>
>
> > Hi everyone.
> >
> > Just wondering if anyone has some FJ20T injectors they are looking to
get
> > rid of.. I'm in Sydney but will freight if needed.
> > Thanx
> > Simon
> >
_________________________________________________________________________
> > Get Your Private, Free E-mail from MSN Hotmail at
http://www.hotmail.com.
> >
> >
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
