thanks heaps for that richard
and there's no probs with sealing doing it this way (ie with no
sealant)???
thanks
andrew
> Here's my method.
> Put a thin nylon chord in the windscreen rubber's outer channel, with the
> ends crossed at the bottom center. Drop the bottom of the screen with
> rubber surround fitted onto the body opening with the chord ends hanging
> over the dash inside the car. Paint a soapy solution (dish washing liquid
> is good) around the rubber edge that will be butted up to the frame and ends
> up inside the car - above the dash and inside hood lining.
>
> With someone pushing inward from outside, as you pull one chord end while
> holding the other, the chord pulls the rubber surround inside the car as the
> chord is pulled inward from the channel. The soapy lubricant helps it fold
> over the frame. Pull right around the screen and it will be fitted!. Take
> 5 mins tops. Don't pull too hard as old hard rubber can be cut by the chord
> just take it easy.
>
> ----- Original Message -----
> From: "Andrew Greenbury" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Tuesday, 13 March 2001 12:02 PM
> Subject: Re: windscreen removal
>
>
> > hi everyone
> >
> > thanks to tim and ppl who suggested ways of getting the
> > windscreens out - they worked a treat and had them out in 10 mins
> > over the weekend.
> >
> > Now has anyone got tips for getting them back in???!
> >
> > thanks guys
> >
> > Andrew
> >
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
