The wheels I'm using on my 510 are 7x15 Compomotive Minilites which seem to
have the same offset as the Silvia rims and therefor fit my Silvia struts
just right. There is no way they would work with 510/810 struts without
spacers. At the rear I have to use 3mm spacers for clearance but I'm going
for rear disks which have a thicker center than the drums so I shouldn't
need them then.
Eddie
England
19 Datsuns and counting...
[EMAIL PROTECTED]
www.ratdat.com
----- Original Message -----
From: VX225 <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, March 19, 2001 11:33 PM
Subject: Re: 16 inches on a datto!
> be careful with Silvia wheels, I have a set of 15 X 6 Silvia wheels I'm
> currently fitting to a 180B SSS, I have had to get a set of 10mm spacers
> laser cut to allow them to clear the strut, also you would either require
> longer wheel studs, or machine 3-4mm from inside the bolt holes to fit mag
> wheel nuts (they have a steel insert, so its not as dangerous as it
sounds).
> other than that, they are standard Nissan/Datsun stud pattern 114.3 PCD.
>
> regards Eddie
>
> ----- Original Message -----
> From: "neraj ramanathan" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Tuesday, March 20, 2001 12:32 AM
> Subject: Re: 16 inches on a datto!
>
>
> > James, if i'm not wrong, i believe the offset for a
> > 1600 is actually 4x114.3, meaning your wheels are of
> > no use for the datsun, though i may be wrong. if i'm
> > correct, you'd be able to use the same wheels suited
> > to silvias and aussie skylines and so on. i hope i'm
> > correct as my younger bro has his eyes on my wheels i
> > replaced on my S13 for his 1600. they're actually of a
> > S14 non turbo (4 stud as opposed to 5 stud for the
> > turbos) we put them against the car and they look
> > awesome. nothing outrageous, but fantastic
> > nonetheless. if you do hear of a good dyno tuner let
> > me know also. i know of one place thats worked on some
> > big power cars, but my personal experience with them
> > proved them to be very expensive and very careless
> > with the car; Amberly Autos. Stay away from these guys
> > if you value your car. they actually overtightened my
> > handbrake after replacing the brakes which was not at
> > all pleasant!
> > Hope i was of some help to you!
> > Regards,
> > Neraj.
> >
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Get email at your own domain with Yahoo! Mail.
> > http://personal.mail.yahoo.com/
> >
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
