|
There is
an XE falcon here with a homemade turbo setup that is running mid 11's on a single
gas research blow through carb. It is a daily driver as well. Ignition Torque
estimates about 500 hp from this setup as it was a bit slippy on the dyno. . Cheers Feral Errol -----Original Message----- Or go to the expense of putting in on
gas. Those gas research mixers run some really powerful blowthru turbo
setups... Probably
would be looking at any big carby. A big Holley or DCOEs can be adapted. -----
Original Message ----- From:
David Costello To:
OZDAT Sent:
Wednesday, April 11, 2001 7:16 PM Subject: blow
through carby turbo setup just wondering if anyone here has a blow through carby turbo setup
running big boost (over 20psi) if so what carby did you use? even if you don't have one, could anyone recomend a carby that's not
going to lean out over 20psi? Dave
--membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ --------------------------------------------------------------------- --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ --------------------------------------------------------------------- |
- blow through carby turbo setup David Costello
- Re: blow through carby turbo setup Zac Campbell
- Re: blow through carby turbo setup Diarmuid Tyson
- Errol Smith
