When i changed my thermostat housing
to make it face the right way for my dunny dore radiator
my thermostat was a 88 deg in my CA18
i put in the one out of the CA16 pulsar which is a 82 deg (i used the
housing as well)
Heath
----- Original Message -----
From: "Errol Smith" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, 5 May 2001 7:00
Subject: RE: Power output of a CA18det?
> Craig,
> It should run at 80C if running at 98 at idle check coolant level or for a
> sticky thermostat first.
>
> Cheers
> Feral Errol
> mailto:[EMAIL PROTECTED]
> http://www.datrats.com.au/
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Craig Harris
> Sent: Friday, May 04, 2001 12:25 PM
> To: [EMAIL PROTECTED]
> Subject: Re: Power output of a CA18det?
>
>
>
> How hot should be safe to run around in with a CA? I took mine for a
little
> drive last night after fixing the brakes (wrong type of push rod) and got
it
> up to 98 C at idle. WHats a good temp for this motor?
>
> _________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
>
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
