dishwashing detergent will cause rust.
Put it in dry and very clean,Fit the rubber to the glass and the chrome if your
has it,then place a 4mm cord in the chanel that holds the rubber to the body.
Have the cross over of the cord at the bottom,get one person to hold the
windscreen over the hole the press lightly,hop in the car and pull one end of
the cord so the rubber lip fold over the body,then work your way around pulling
the string out,I find a up angle on the cord works well.
Sometimes the aid of a small screwdriver helps,Some cars are a lot harder to do
but the 510 is very easy.
Unless its a 68-69 window into a 71-72 car then it wont fit.
Malcolm
Richard Clough wrote:
> Try lubricating the 'flap" so it slides easily around the rim and into the
> cabin. I use dishwashing detergent as the lube.
> ----- Original Message -----
> From: "Justin Friedrichs" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Friday, 20 April 2001 11:25 AM
> Subject: RE: windscreen refitting
>
> >
> > Hi List
> > I have some new windscreen seals for the front and back, is there a
> > different method for inserting them in.
> > I hope not.
> > All I was going to do was glue in the new seals, put a nylon chord in the
> > grooves, get someone to push the windscreen, pull the flaps of the rubber
> > with the nylon chord.
> > Sound OK.
> > Cheers
> > Justin
> >
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
