Zac,
On my 219 sss head I had the water holes tig'ed up and then had the manifold
surface, surfaced. I prefer to weld up the water ports in the head and not
the water ports in the manifold.
Trev
-----Original Message-----
From: Zac Campbell [mailto:[EMAIL PROTECTED]]
Sent: Sunday, 6 May 2001 22:15
To: [EMAIL PROTECTED]
Subject: Re: Temp gauges
I was thinking of getting something welded in there with a TIG welder? The
manifold is aluminium/alloy isn't it?
zac
----- Original Message -----
From: Terry Rudd <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, May 06, 2001 9:31 PM
Subject: RE: Temp gauges
> I'm not too sure how's the best way to do this, may be a suggestion or two
> out there? Whatever way, it will have to sustain 13 psi so I'd be looking
at
> using some sort of plug in the holes as I don't think gasket material
would
> be up to the task.
>
> Terry
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Zac Campbell
> Sent: Sunday, 6 May 2001 8:52
> To: [EMAIL PROTECTED]
> Subject: Re: Temp gauges
>
>
> Yep Terry, that was what I was thinking. I'll do it.
> Just how to plug up the manifold water galleries.
>
> cya
>
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
