Chris,
I had some fj20et injectors cleaned and tested about 10 years ago and I think
they were around 320-340cc but i cant remember what pressure this was
at.Someone else might have more accurate figures.Ive used 036 blue merc
injectors from a 450se which flowed 510cc at 3.3 bar.I got these from a merc
wrecker in maddington for $80 for 8 of them with good plugs.Other merc
injectors034 green from 350 merc 450cc,013 black from 280 merc 350cc.Some
mercs use different injectors in the same model.
Andrew Smith
FJ MAN wrote:
> can u tell me the flow rating of both those injectors
> i got the z18et ones put on a flow bench 240cc haha meaty ey :)
> regards chris
>
> >From: steve taylor <[EMAIL PROTECTED]>
> >Reply-To: [EMAIL PROTECTED]
> >To: [EMAIL PROTECTED]
> >Subject: Re: injectors]
> >Date: Wed, 23 May 2001 04:34:58 +1000
> >
> >Most of us use either ca18det or fj20det injectors in our z18's! They are
> >a str8 bolt in and flow 30% more than stocky injectors.
> >Steve.
> >
> >robert hall wrote:
> >
> > > hi, any one know af any higher flow injectors that i can put straight
> > > into my Z18 manifold?
> > >
> > > mark]
>
> _________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
