HI I`am wanting a Ca18det s13 radiator ..dose any have one 4 sale? or Know of a importer in Brisbane which sells them ..? are the sr20 s14 the same ? Regards Cameron From: "Philip Shields" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Date: Friday, June 01, 2001 2:15 Subject: Re: FJ20DET Manifolds >Matt do you have a phone number and address for this place. >philip j shields > > >>From: "Matt" <[EMAIL PROTECTED]> >>Reply-To: [EMAIL PROTECTED] >>To: <[EMAIL PROTECTED]> >>Subject: Re: FJ20DET Manifolds >>Date: Wed, 30 May 2001 14:46:25 +1000 >> >>philip, >>there in nsw. >> >>matt >>-----Original Message----- >>From: Philip Shields <[EMAIL PROTECTED]> >>To: [EMAIL PROTECTED] <[EMAIL PROTECTED]> >>Date: Tuesday, 29 May 2001 12:15 >>Subject: Re: FJ20DET Manifolds >> >> >> >what state >> >philip j shields >> > >> > >> >>From: "Matt" <[EMAIL PROTECTED]> >> >>Reply-To: [EMAIL PROTECTED] >> >>To: <[EMAIL PROTECTED]> >> >>Subject: Re: FJ20DET Manifolds >> >>Date: Thu, 24 May 2001 12:01:03 +1000 >> >> >> >>james, >> >>i found an importer in chipping norton that sells fj20t with g/box >> >>,loom,ecu >> >>for $1200 also has sr20t,g/box,loom,ecu for $1900 >> >>cheers >> >>matt >> >>-----Original Message----- >> >>From: jamesf <[EMAIL PROTECTED]> >> >>To: [EMAIL PROTECTED] <[EMAIL PROTECTED]> >> >>Date: Thursday, 24 May 2001 2:11 >> >>Subject: Re: FJ20DET Manifolds >> >> >> >> >> >> >I went out this arvo to have look at a couple of FJ20det's we >> >> >tracked down in Melbourne.. both are the 'over the radiator >> >> >hose' type, like 'Jake's'... looks like that's what we are getting.... >> >> > >> >> >After a trip to a state round of the sports sedans at sandown >> >> >recently, we have done an about face on the engine side of >> >> >things with our race cars... now going with the FJ's... >> >> > >> >> >So if anybody wants a Z18et complete.. we have a couple >> >> >for sale (with engine mounts to fit into a sunny too if you >> >> >want them :) >> >> > >> >> >cya >> >> >James >> >> > >> >> > >> >> >Terry Rudd wrote: >> >> > >> >> >> Gooday Matt, >> >> >> >> >> >> You are absolutely correct and I made a big blooper last night with >> >>these >> >> >> manifolds. There are two Skyline FJ's and only one S12 version. >> >> >> >> >> >> regards >> >> >> Terry >> >> >> >> >> >> -----Original Message----- >> >> >> From: [EMAIL PROTECTED] >> >> >> [mailto:[EMAIL PROTECTED]]On Behalf Of Matt >> >> >> Sent: Tuesday, 22 May 2001 4:46 >> >> >> To: [EMAIL PROTECTED] >> >> >> Subject: Re: FJ20DET Manifolds >> >> >> >> >> >> james, >> >> >> there all skyline manifolds , the first one from autospeed has been >> >>'cleaned >> >> >> up' looks like he's remove alot of polution stuff on there. i have a >> >>pic >> >>of >> >> >> the gazelle manifold if you want to see what they look like. >> >> >> cheers >> >> >> matt >> >> >> -----Original Message----- >> >> >> From: jamesf <[EMAIL PROTECTED]> >> >> >> To: [EMAIL PROTECTED] <[EMAIL PROTECTED]> >> >> >> Date: Monday, 21 May 2001 9:12 >> >> >> Subject: Re: FJ20DET Manifolds >> >> >> >> >> >> >Ok.. I thought there was only the 2 types to choose from... but >> >> >> >I have found 3 different ones so far.... all factory.. how many >> >> >> >others are there? >> >> >> > >> >> >> >http://www.autospeed.com/A_0455/P_1/article.html >> >> >> > >> >> >> >http://www.ozdat.com/ozdatonline/featurecars/jakeFJ/jakefj6.html >> >> >> > >> >> >> >http://www.ozdat.com/ozdatonline/featurecars/HenriFJ/henri_dat3.htm >> >> >> > >> >> >> >Anybody know what each type is from? >> >> >> > >> >> >> >regards >> >> >> >James >> >> >> > >> >> >> > >> >> >> > >> >> >> >Terry Rudd wrote: >> >> >> > >> >> >> >> James, >> >> >> >> >> >> >> >> Only the DR30 engine was available only with factory i/c although >> >>I've >> >> >> seen >> >> >> >> up to 9 psi run on these engines without an i/c fitted. The DR30 >>i/c >> >>is a >> >> >> >> lunchbox but even so it's surprising effective up to around 9-10 >> >>psi. >> >>I >> >> >> >> chose that engine as it had a much better potential for coping >>with >> >> >> moderate >> >> >> >> boost (up to 1 bar) when fitted with a Cordia or Supra i/c. It >>has >>a >> >> >> better >> >> >> >> turbo stock, problem is the stock exhaust manifold is further >> >>rearward >> >> >> and >> >> >> >> is a bit of a pain to fit on a 1600. The lower C/R engine is out >>of >> >>the >> >> >> S12 >> >> >> >> but the bigger exhaust housing is off the DR30. I've seen the >>other >> >>way >> >> >> >> round done on a 1600 quite a few times as it's an easier fit on a >> >>manual >> >> >> >> body. The factory inlet manifold is basically the same on either >> >>turbo >> >> >> >> engine afaik, there are a couple of varieties on the NA engines >> >>though. >> >> >> >> >> >> >> >> regards >> >> >> >> Terry >> >> >> >> >> >> >> >> -----Original Message----- >> >> >> >> From: [EMAIL PROTECTED] >> >> >> >> [mailto:[EMAIL PROTECTED]]On Behalf Of jamesf >> >> >> >> Sent: Monday, 21 May 2001 7:16 >> >> >> >> To: [EMAIL PROTECTED] >> >> >> >> Subject: Re: FJ20DET Manifolds >> >> >> >> >> >> >> >> That's the question... Skyline or Gazelle.... though Custom >> >> >> >> inlet might be an option down the track a bit... >> >> >> >> But right now I want to get the best base engine... and >> >> >> >> I have found I can get either one... So which is the best? >> >> >> >> >> >> >> >> Also were both of those available in Intercooled or non >> >> >> >> intercooled versions from the Factory? or was it just the >> >> >> >> gazelle one?? >> >> >> >> ... Cause I want the non intercooled version for the >> >> >> >> 7:5 to 1 comp ratio and the bigger Exhaust housing on the >> >> >> >> turbo... >> >> >> >> >> >> >> >> Any ideas? >> >> >> >> >> >> >> >> Regards >> >> >> >> James >> >> >> >> >> >> >> >> Zac Campbell wrote: >> >> >> >> >> >> >> >> > I think James is referring to the Skyline vs Gazelle manifolds? >> >> >> >> > >> >> >> >> > zac >> >> >> >> > >> >> >> >> > ----- Original Message ----- >> >> >> >> > From: andrew smith <[EMAIL PROTECTED]> >> >> >> >> > To: <[EMAIL PROTECTED]> >> >> >> >> > Sent: Monday, May 21, 2001 3:46 PM >> >> >> >> > Subject: Re: FJ20DET Manifolds >> >> >> >> > >> >> >> >> > > James, >> >> >> >> > > Shorter inlet runners produce horsepower higher on the rev >> >>scale.Paul >> >> >> >> > > Staneks fj20 1200 coupe has a manufacuted manifold that uses >> >>very >> >> >> short >> >> >> >> > > runners with a large plennum. >> >> >> >> > > Andrew Smith >> >> >> >> > > >> >> >> >> > > jamesf wrote: >> >> >> >> > > >> >> >> >> > > > Hi List >> >> >> >> > > > Just wondering which of the FJ20DET inlet manifolds >> >> >> >> > > > is the better...the long or the short? >> >> >> >> > > > which has the highest HP potential?? >> >> >> >> > > > regards >> >> >> >> > > > James >> >> >> >> > > > -- >> >> >> >> > > > >> >> >> >> >> >>________________________________________________________________________ >> >> >> >> > > > >> >> >> >> > > > James Fitness >> >> >> >> > > > Director >> >> >> >> > > > Data Scribe Australia Pty Ltd >> >> >> >> > > > http://www.datascribe.com.au >> >> >> >> > > > Computers and Supplies >> >> >> >> > > > >> >> >> >> > > > OZDAT Online >> >> >> >> > > > http://www.ozdat.com/ozdatonline/index.htm >> >> >> >> > > > >> >> >> >> > > >> >> >> >> >> >> >> >> -- >> >> >> >> >> >>________________________________________________________________________ >> >> >> >> >> >> >> >> James Fitness >> >> >> >> Director >> >> >> >> Data Scribe Australia Pty Ltd >> >> >> >> http://www.datascribe.com.au >> >> >> >> Computers and Supplies >> >> >> >> >> >> >> >> OZDAT Online >> >> >> >> http://www.ozdat.com/ozdatonline/index.htm >> >> >> >> >> >> >> > >> >> >> >-- >> >> >> >> >> >> >________________________________________________________________________ >> >> >> > >> >> >> >James Fitness >> >> >> >Director >> >> >> >Data Scribe Australia Pty Ltd >> >> >> >http://www.datascribe.com.au >> >> >> >Computers and Supplies >> >> >> > >> >> >> >OZDAT Online >> >> >> >http://www.ozdat.com/ozdatonline/index.htm >> >> >> > >> >> >> > >> >> > >> >> >-- >> >> >> >________________________________________________________________________ >> >> > >> >> >James Fitness >> >> >Director >> >> >Data Scribe Australia Pty Ltd >> >> >http://www.datascribe.com.au >> >> >Computers and Supplies >> >> > >> >> >OZDAT Online >> >> >http://www.ozdat.com/ozdatonline/index.htm >> >> > >> >> > >> > >> >_________________________________________________________________________ >> >Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. > >_________________________________________________________________________ >Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
