Thank Errol.
Ill start looking around for a long snout. The Diff I had in the 510 b4 I
stripped it down, was a 240K open, will I have enough bit to do the
transplant if I find an R200? I also have a stuffes 1600 diff (center is
stuffed) for nuts and bolts too.
Jordan
> Jordan,
> There are two R200 diff lengths, short snout and long snout. The early
> R200's are all long snout and the later ones are all short snout.
Mounting
> bolts are different for the short snout.
>
> Cheers
> Feral Errol
> mailto:[EMAIL PROTECTED]
> http://www.datrats.com.au/
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Jordan
> Sent: Sunday, February 07, 1999 2:31 PM
> To: [EMAIL PROTECTED]
> Subject: VLSD (again)
>
>
> Hi list.
> On the earlyer topic of VLSD I found a page about putting 300ZX VLSD into
a
> 240sx.
> Now, next question, if anyone knows the answer, is are the 240sx Diffs the
> same a 1600 diffs? And if not, how much cut and past would it take to get
> one in?
> Heres the page: http://www.240sx.org/links/installs/lsd/lsd.htm
> It also has a little on how the work too.
> Thanks
> Jordan
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
