Jordan,
Minimum thickness of the 270mm C210 rotor is 10.5mm
The struts will bolt into the 70+ 1600 reversed left to right and using 1600
springs and hats but some of the callipers will not fit without some
grinding but you can use the 240K twin spot callipers (preferred as you can
get better pads) or 200B Girlock callipers if this happens.
Have you bought these yet, if not and you live in Sydney, there is a set of
complete 240K struts with twin spots at Dunkers that I saw the other day
that may be worth a look.
The R180 diff was still in it too.
regards
Terry
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Jordan
Sent: Thursday, 21 June 2001 8:58
To: [EMAIL PROTECTED]
Subject: 1978 Skiline (R31?) Disk Brake min width +struts
Hello list
Just seeing if anyone knows what the minimum disk width, for RTA roadworhy
(vic), on the skiline78 frount disk brakes.
And the struts out of the skiline, do they bolt strait into 1600? or do you
need some kind of an adaptor at the bottom? Ive seen them without an
adaptor, but Ive also seen lots of skin been taken off (not mine of course!)
from from ppl trying to over tighten the bolts to hold the weight.
Thanks
Jordan
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
