Trevor,
I flowed the blue 036 at 3.3 bar (48psi) at 100% duty cycle on a superflow
machine.I tested 8 of them and were all close to 510cc as i used all 8 on the
fj20.Motec also claim that there figures are about the same as what i got.I see
ems are rating them at 600cc so maybe they tested them at higher pressure.I
think autospeed are using 80% duty cycle figures which are probably the best way
to set up your injector sizing.
Andrew Smith
"Pooley, Trevor" wrote:
> Andrew,
>
> On the web 036 are written up as flowing 380cc/min at 3 bar (ref autospeed).
> You've written 8.5 per sec so 8.5 x 60 = 510cc/min? So at what fuel pressure
> did you get his info?
>
> Regards
> Trev
>
> -----Original Message-----
> From: andrew smith [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, 17 July 2001 19:14
> To: [EMAIL PROTECTED]
> Subject: Re: injector flow rate (mercedes)
>
> Robert,
> The blue 036 flows 8.5 mls per sec.The green 034 flows 7.5 mls per sec.The
> yellow
> 034 flows 6.4 mls per sec.
> Andrew Smith
>
> robert hall wrote:
>
> > hi, can any one tell me the flow rate for this injector of a mercedes?
> > color is yellow
> > 0280 150 034
> > i checked asome sites on the net but could only find 036 and some before
> the
> > 034 .
> > mark
> >
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
