agree! ----- Original Message ----- From: Pooley, Trevor <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, October 19, 2001 5:03 PM Subject: RE: strut identification needed
> Thomas, > > Sounds like its early 240K. > > Regards > Trev > > -----Original Message----- > From: Thomas Grant [mailto:[EMAIL PROTECTED]] > Sent: Friday, 19 October 2001 17:58 > To: [EMAIL PROTECTED] > Subject: Re: strut identification needed > > > disk diameter is 253mm (about 10inches) > caliper mount spacing is 89 mm > stub axle diameter: I didn't know exactly which diameter to measure, so I > measured them all. The thickest part (I assume this is the one needed is > 32mm, the thinner part after the taper is 19mm, the threaded part is 18mm > and the thin bit at the end where the split pin goes through is 15.5mm. Hope > > these help! Thomas. > > >From: [EMAIL PROTECTED] > >Reply-To: [EMAIL PROTECTED] > >To: [EMAIL PROTECTED] > >Subject: Re: strut identification needed > >Date: Fri, 19 Oct 2001 04:13:17 GMT > > > >looks like a 180b monstrosity only larger? > >Last time you posted we asked for some measurements that would be able to > >help > >us identify the strut but you did not reply. > >Measure the caliper mount spacing. > >Measure the stub axle diameter (it is under the disc/hub). > > > > > > > > > Hi list, I posted a querie on the list a few weeks ago about how to work > > >out > > > what strut are on my 1600. It isn't obvious to me what point at the > >bottom > > > of the strut is the "stub axle". Could someone please clear this up for > >me > > > so I can measure them properly. In the mean time I've taken a photo of > >the > > > brakes on the struts and uploaded it to the members area :unidentified > > > struts. The previous owner had ground away some of the metal on the > >caliper, > > > as indicated by the red arrows in the picture > > > http://www.ozdat.com/membersozdat/uploads/ , to allow the fittment of a > >13 > > > inch datto rim. Does anyone what struts these brakes are off? Thanks, > > > Thomas. > > > > > > > > > > _________________________________________________________________ > Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
