Trevor, Yeh we thought of that and made a small tank.We found a small davies craig lift pump that will pump hot oil so we'll give it a go.We'll measure the flow of oil coming from the turbo and hopefully can get the pump to run slow enough.Might have to wire in some droping resistors.We're also using the same type pump to run the rs liberty water/air intercooler.There's not much room for anything in the MGF's.The wankers who setup the unichip melted the standard ecu so it now has a motec on it which doesnt have many outputs on it. Andrew Smith
"Pooley, Trevor" wrote: > Andrew, > > Just thinking. Turbo return oil is all frothy after the turbo. Will it be > nessesary to run the oil to a catch can to settle the oil before pumping it > back to the sump. > > Regards > Trev > > -----Original Message----- > From: andrew smith [mailto:[EMAIL PROTECTED]] > Sent: Friday, 16 November 2001 4:11 > To: [EMAIL PROTECTED] > Subject: electric oil pump > > I'm chasing a small electric pump thats suitable to pump hot oil.Its for > a turbo drain line where the turbo is mounted very low and needs a pump > to get the oil to the sump.Any suggestions on a pump. > Andrew Smith > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
