** See comments.
-----Original Message-----
From: David Costello [SMTP:[EMAIL PROTECTED]]
Sent: 18/11/2001 19:18
To: [EMAIL PROTECTED]
Subject: Z18 questions
thinking of buying a Z18 turbo just wanted to check a few facts first
�
#1 the guy says it's still standard pistons but the head has been shaved .040" ,what compression ratio would this make.
**The STD ratio is 8.5:1. As far as I know the head setup is good for 20psi with no problems of detonation, everything else needs to be up to scratch. I wouldn't be wanting a shaved head for turbo work though.
#2 how much boost can be run through a standard Z18 (taking into consideration the head shave) wolf 2d computer, T28 and no intercooler.� he said it's never been taken above 10psi.
**Why does it have a T28? If the turbo is not of the T3 style then the intake and exhaust plumbing would be different. Hard to see why they would do that, as there is nothing wrong with a good T3 setup. The limit is around 10psi with no intercooler, but you need to be careful of detonation. The factory boost is set to ~7psi.
#3 the car made 176hp @ wheels on 6psi, is this fairly average for a Z18? sounds fairly high for 6psi.
�**I don't think so. Not unless it was doing 10,500rpm. Factory boost gets you 108kw at flywheel at 5,500rpm.
#4 a bottom end bearing has gone, would the most cost effective option be replacing the bearing, or just dropping in an L20 bottom end?
�**If one of the bearings is gone, then you will have to strip it down to check what else has gone. Seems strange for just one bearing to wear out prematurely unless there was problem with the rebuild or oil problems. The L20B pistons will need to be flycut for the valves. Try a Z22 bottom end.
my plan was to get a Z18 and put the L20 bottom end under it, I was interested in this one�cause of the price (just over a grand�for the complete stanza) but I'm thinking now that if the head on it's shaved I'm gunna be up for another head later if I wanna reduce compression, so maybe there's no point buying this.� Or is it still good for the price, considering I'd get the T28, Wold2d, manifolds etc etc.
�
Dave
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
