Hi Greame, Just un-do the nuts on the inside of the car (under the rear seat) and they just drop out!
Cam CM510 www.datnet.org/cm510 ----- Original Message ----- From: "Graeme Harlor" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, November 20, 2001 4:36 PM Subject: Re: removing suspension pins > No, the crossmember is completely out of the car. It is the pins in the body that the crossmember attaches to that I want to take out. > > Graeme, > > Are you trying to remove the trailing arms from the crossmember or the > crossmember from the body? > > Mark. > > ----- Original Message ----- > From: "Graeme Harlor" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Tuesday, November 20, 2001 2:20 PM > Subject: removing suspension pins > > > > > > Hi guys, > > > > Just wondering if anyone knows how to get the pins/bolts out, that hold > the rear IRS to the body in the 510 sedan??? > > They have a bolt head of about 21mm, but they don't seem to unscrew, or > even pop out with a hammer. > > > > Also, has anyone had experience addapting five stud hubs to the front of a > 510? > > > > Thanks in advance, > > Graeme. > > > > > > > > > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
