hey guys,

you have to be careful with reversing the airflow by reversing the wire 
polarity, because a lot of these motors are designed to rotate the one 
way. you can burn them out by making them rotate in the opposite 
direction. thats why davies craig ones are reversed by reversing the fan 
not polarity. 

greg - if you stick your hand in front of my grill you would swear the 
fan is blowing not sucking too. but when you compare the flow on the 
engine side vs the grill side you realise that it is actually sucking as 
it should. as eric suggested, check out whether the donor car for the 
thermofan had it mounted engine side or grill side to determine the 
operation it was designed for.

good luck for the new 1600 project :)
andrew 

On Sun, 25 Nov 2001, Jon Ovington wrote:

> Some fans for example aftermarket Davies Craig can easily bun unbolted and
> turned around to suit 'blowing' or 'sucking' for in front or behind the
> radiator.
> 
> However, Greg seems to have said, is thermo blows hot air out! If this is
> so, the fan is behind the radiator but is pushing air out, this is not good!
> 
> You will need to reverse the fan, or the polarity of the wires to the fan
> motor to get it to spin the other way and 'suck' the air in.
> 
> cheers,
> Jon
> 
>  -------------------------------------------------------
>  DatNet  - Online Datsun Resource
>  Website: http://www.datnet.org
>  Jon Ovington - [EMAIL PROTECTED]
>  Matt Spiteri - [EMAIL PROTECTED]
>  [EMAIL PROTECTED] [EMAIL PROTECTED]
> 
> 
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Eric
> Sent: Sunday, 25 November 2001 10:06 PM
> To: [EMAIL PROTECTED]
> Subject: Re: thermo fan.
> 
> 
> Greg,
> 
> I was told that some thermos are designed for the front of the radiator,
> that is to push the air through and others are designed to pull it through
> and therefore to be installed on the back.
> 
> I don't know whether you can swap them around. It has something to do with
> the design of the fan blade.
> 
> Was your's previously installed on the back or the front ?
> 
> Cheers
> 
> Eric
> 
> 
> 


--membersozdat-------------------------------------------------------
OZDAT Mailing List   Please Note:-
Send (un)subscribe requests to  [EMAIL PROTECTED]
Send  submissions to  [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------

Reply via email to