oh ok so you just used standard hight temp paint? and was 50 foot enough did you use clamps at the ends as well? sorry for all the questions just thinking about doing mine
Ryan > -----Original Message----- > From: Rowe, Adam [SMTP:[EMAIL PROTECTED]] > Sent: Thursday, 6 December 2001 11:15 am > To: [EMAIL PROTECTED] > Subject: RE: help required - l20b ignition probs > > I used the 1" 50 foot roll or webbing style thermo tape. I was unaware > of a special paint or tape to use. I used a high temp white paint to seal > it and to stop it moving. It made a massive difference, I should put it > on my dump pipe too. > > -----Original Message----- > From: Chalmers, Ryan [SMTP:[EMAIL PROTECTED]] > Sent: 06/12/2001 10:03 > To: '[EMAIL PROTECTED]' > Subject: RE: help required - l20b ignition probs > > did you use the tape? and if so did you paint them with that special stuff > > they recommend?? > Ryan > > > > -----Original Message----- > > From: Rowe, Adam [SMTP:[EMAIL PROTECTED]] > > Sent: Thursday, 6 December 2001 10:27 am > > To: [EMAIL PROTECTED] > > Subject: RE: help required - l20b ignition probs > > > > After fitting thermo wrap I could just about hold the extractors after > > normal driving. Where as before I couldn't open the bonnet fro 20 mins. > > > > > -----Original Message----- > > From: Chalmers, Ryan [SMTP:[EMAIL PROTECTED]] > > Sent: 05/12/2001 16:22 > > To: '[EMAIL PROTECTED]' > > Subject: RE: help required - l20b ignition probs > > > > no worries I think Adam said it b4 but keep an eye on the temp that the > > module gets as this does degrade them I have built a heat shield > > specifically for the module to guard against my extractors but also need > > > to > > put some tape on them to try and keep the temps down specially now in > the > > hot weather > > > > glad it's fixed > > Ryan > > > > > > > -----Original Message----- > > > From: David Thompson [SMTP:[EMAIL PROTECTED]] > > > Sent: Wednesday, 5 December 2001 5:00 pm > > > To: [EMAIL PROTECTED] > > > Subject: RE: help required - l20b ignition probs > > > > > > > > > it was the ignition module - running sweet now, cheers > > > --membersozdat------------------------------------------------------- > OZDAT Mailing List Please Note:- > Send (un)subscribe requests to [EMAIL PROTECTED] > Send submissions to [EMAIL PROTECTED] > No unauthorised redistribution of this email > http://www.ozdat.com/ozdatonline/index.htm > http://www.ozdat.com/ozdatonline/listindex.html > http://www.mail-archive.com/[email protected]/ > --------------------------------------------------------------------- --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
