Ok might look into it then, I was thinking of yousing stainless hose clamps


> -----Original Message-----
> From: Rowe, Adam [SMTP:[EMAIL PROTECTED]]
> Sent: Thursday, 6 December 2001 11:55 am
> To:   [EMAIL PROTECTED]
> Subject:      RE: help required - l20b ignition probs
> 
> I bought a 50' 1" roll for around $50.  I then wrapped, as best I could
> with the extractors in the car, around each runner starting at the head
> end.  Then I kept wrapping until I got down to the collector and stopped.
> I wrapped the tape pretty tight near the head so the tape holds itself and
> I used some thin wire twisted to hold the ends.  I then painted all the
> wrap with high temp, silicone based I think, white paint.  This made the
> wrap look like a single sheet.  Then for a couple of weeks the paint
> smoked and smelled when I drove.  After that it was fine.  I was left with
> about 30 feet of tape left, so a roll should be heaps.  And you would be
> better of doing the extractors when they are off the car.
> 
> -----Original Message----- 
> From:   Chalmers, Ryan [SMTP:[EMAIL PROTECTED]] 
> Sent:   06/12/2001 10:33 
> To:     '[EMAIL PROTECTED]' 
> Subject:        RE: help required - l20b ignition probs 
> 
> oh ok so you just used standard hight temp paint? and was 50 foot enough
> did 
> you use clamps at the ends as well? sorry for all the questions just 
> thinking about doing mine 
> 
> Ryan 
> 
> 
> > -----Original Message----- 
> > From: Rowe, Adam [SMTP:[EMAIL PROTECTED]] 
> > Sent: Thursday, 6 December 2001 11:15 am 
> > To:   [EMAIL PROTECTED] 
> > Subject:      RE: help required - l20b ignition probs 
> > 
> > I used the 1"  50 foot roll or webbing style thermo tape.  I was unaware
> 
> > of a special paint or tape to use.  I used a high temp white paint to
> seal 
> > it and to stop it moving.  It made a massive difference, I should put it
> 
> > on my dump pipe too. 
> > 
> > -----Original Message----- 
> > From:   Chalmers, Ryan [SMTP:[EMAIL PROTECTED]] 
> > Sent:   06/12/2001 10:03 
> > To:     '[EMAIL PROTECTED]' 
> > Subject:        RE: help required - l20b ignition probs 
> > 
> > did you use the tape? and if so did you paint them with that special
> stuff 
> > 
> > they recommend?? 
> > Ryan 
> 
> 
> --membersozdat------------------------------------------------------- 
> OZDAT Mailing List Please Note:- 
> Send (un)subscribe requests to [EMAIL PROTECTED] 
> Send submissions to [EMAIL PROTECTED] 
> No unauthorised redistribution of this email 
> http://www.ozdat.com/ozdatonline/index.htm 
> http://www.ozdat.com/ozdatonline/listindex.html 
> http://www.mail-archive.com/[email protected]/ 
> ---------------------------------------------------------------------

--membersozdat-------------------------------------------------------
OZDAT Mailing List   Please Note:-
Send (un)subscribe requests to  [EMAIL PROTECTED]
Send  submissions to  [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------

Reply via email to