Zac
I'm not certain of the exact size of the inlet. They are the same as the
original 1600.  The 180B outlet is also the same, 6.5mmO/D.

----- Original Message -----
From: "Zac Campbell" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, 4 January 2002 23:21 PM
Subject: Re: Fuel Tank for 1600


> Richard, what size inlet and outlets does this tank have, if you know?
>
> cheers,
> Zac
>
> ----- Original Message -----
> From: Richard Clough <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Friday, January 04, 2002 10:40 PM
> Subject: Re: Fuel Tank for 1600
>
>
> > A 180B sedan almost bolts in and gives 55ltrs storage, 10 up on a 1600.
> > You need to lightly trim the flared sides of the 180B tank where the top
> and
> > bottom sections of the tank join, to fit it between the towers. Be
careful
> > not to cut inside the weld when trimming.  For safety, dont use a
grinder,
> > use a hacksaw or snips.  As the 180 tank is deeper, you also need to
> > fabricate two small (25mm) blocks to mount the tank on and bolt through
> > these to the original mounts.  The 180B fuel gauge sender plugs into the
> > 1600 wiring loom and works correctly. The 180 fuel filler neck fits, and
> > will probably be in better condition than the 1600 one.
> >
> > A 200B tank is built differently.  The join between the top and bottom
> > halves is not horizontal.  This makes mounting  a bit more difficult,
and
> > the filler neck is too high to fill from the original filling position.
> For
> > the extra 5 litres over a 180B tank its not worth the hassle, in my
> opinion.
> >
> > ----- Original Message -----
> > From: "Chris Williams" <[EMAIL PROTECTED]>
> > To: <[EMAIL PROTECTED]>
> > Sent: Wednesday, 2 January 2002 15:19 PM
> > Subject: Fuel Tank for 1600
> >
> >
> > > Hi,
> > >    I was just wondering what fuel tank I can put in my 1600 I was
hoping
> > > for about 60 Litres.  Will a 200B tank fit? If not what otehr tanks
are
> > > options?
> > >
> > > Regards
> > >
> > > Chris
> > >
> > >
> > >
> >
> >
>
>

--membersozdat-------------------------------------------------------
OZDAT Mailing List   Please Note:-
Send (un)subscribe requests to  [EMAIL PROTECTED]
Send  submissions to  [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------

Reply via email to