yerr but the electrolsis runs through the coolant, doesn't matter about the tanks? i'll find out for sure as i have a radiator place next door.
Heath ----- Original Message ----- From: Justin Friedrichs <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, January 09, 2002 12:07 PM Subject: RE: sr20det/1600 radiator > If you use an alloy radiator, most of them have plastic end tanks so the > core will not conduct. If they are metal just use rubber mounts. > > Justin > > > -----Original Message----- > > From: Cleary Signs [SMTP:[EMAIL PROTECTED]] > > Sent: Wednesday, January 09, 2002 12:20 PM > > To: [EMAIL PROTECTED] > > Subject: Re: sr20det/1600 radiator > > > > if you use an alloy > > make sure you have no electrolsis > > or it will eat the core in a couple of weeks > > > > Heath > > ----- Original Message ----- > > From: andrew smith <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Tuesday, January 08, 2002 9:09 PM > > Subject: sr20det/1600 radiator > > > > > > > Any suggestions for a suitable ally radiator for a sr20det/1600 > > > conversion.Prefer something 500mm or less wide.I might just have to > > > stick with the trusty 1600 radiator if i cant find anything cheap. > > > Andrew Smith > > > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
