I'm using twin webers with the factory setup""Rods"" The rod that goes from the fire wall to the carbs needs to be fully cut down and turned 180o then it will work fine,OOHH plus you have to move the mount on the fire wall about 1/2" (inch) I think I also lenghed the main rod across the firewall about 2"
Malcolm ""Hope this helps"" 1600 BoY wrote: > after trying for a few weeks to get twin 40mm webers to run on my car and > not recieving any ozdat emails(doh no internet help to get em running) > > i finally got them started. (thanks paddy) > but yeh now i spose the only problem i got is a real sticky throttle. the > first like 1mm you try to push down its real sticky. so you push harder > still nothing. then harder again and b4 u know it your flat to the floor and > it just chugs. really hard to get used to. im using a series 2 or 3 bluebird > throttle and cable setup. not the rod linkage. but its the pull cable. > pretty much a dodgey job but hey it works and im loving the sound of the > webers. but if anyone can reccomend a good linkage setup(cheapish) it would > be greatly appreciated. > thanks, > ryan > > _________________________________________________________________ > Join the world�s largest e-mail service with MSN Hotmail. > http://www.hotmail.com > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
