|
Terry
The front brakes/struts are from the blue car. Toby
got the R31 rear end
The Holden/Volvo set up was supplied on the yellow
car.
Interesting that u say 144 volvo as I have been
scouring the DBA Catalogue looking for something to fit. (Mine are so warped u
wouldn't believe.) The closest thing I can find is a 740 series Volvo DBA685 FYI
the original disc is A =257. B = 59, C&D =21, E = 68
According to the book no 144's had vented
discs....Will DBA supply blanks? or could i specify datto stud
holes??
And of course credit for all the clever stuff goes
to Paul Williamson here on the gold coast..
cheers
Mick
----- Original Message -----
--membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ --------------------------------------------------------------------- |
- Brakes for a 1600 mick ralph
- Re: Brakes for a 1600 Dan
- RE: Brakes for a 1600 Terry Rudd
- Re: Brakes for a 1600 mick ralph
- Re: Brakes for a 1600 Daniel Kroehn
- R31 Struts to 1600 Dan
- RE: R31 Struts to 1600 E Smith
- Re: R31 Struts to 1600 Cleary Signs
- 180B panels and car WANTED!!! nat P.
- fuel rail mark krawczuk
- RE: fuel rail E Smith
- surging problem mark krawczuk
- RE: R31 Struts to 1600 Dan
- RE: R31 Struts to 1600 E Smith
