hi, i think i found out the problem when my engine hit boost(the sudden jerking). i tried two other efi fuel pumps, but no go. then i noticed there was a oil leak where i put the oil line for the turbo, so i cleaned it up and titened up the fittings, and took it for a drive, still leaking. i also noticed there was some water droplets on the fittings, so i cleaned it up again, got my brother to start it up , while i was in the pit, and noticed water and oil coming out between the head and block, great.........................
took the head off and two of the bolts where it was lleaking on that side where loose, when i looked at the top of the block, the thread was lifted above the block a little, thats what i reckon was causing the problem under boost, plus u could see dark marks on the block, like where gasses where passing thru cause the head was loose. looks like i will have to helicoil the whole lot of head bolt threads. is there any other head gasket sealer besides 3bond and hylomar? mark k --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
