Re: 1600 rubber engine mounts????

[maldat]

Very nice.

Malcolm

Chalmers, Ryan wrote:

[EMAIL PROTECTED]">

How long is a Piece of String ??
Twice the distance from the end to the Middle

Ryan

-----Original Message-----
From:	maldat [SMTP:[EMAIL PROTECTED]]
Sent:	Tuesday, 5 March 2002 7:12 pm
To:	[EMAIL PROTECTED]
Subject:	Re: 1600 rubber engine mounts????

How long is a pice of string??.
They arnt comen as we know,But I'm sure to have a idle one around.

Malcolm

E Smith wrote:

How much Malcom?

Cheers
Feral Errol

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of maldat
Sent: Tuesday, 5 March 2002 5:52 PM
To: [EMAIL PROTECTED]
Subject: Re: 1600 rubber engine mounts????

Use the early 1600OHC cam cover with the chrome filler cap,as it is

lower

and
clears the bonnet..
Thats on a L20B
Malcolm

Richard Clough wrote:

The easiest way to get an L20 to sit under the bonnet is to cut the LH
engine mount metal bracket vertically, then reweld it so the LH engine

side

is slightly lower, 5mm offset is more than enough. After grinding the
welding flush and repainting black nobody will detect this

modification

under the manifolding.
Alternatively use a side draft carby set up.
----- Original Message -----
From: "Leighton" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, 28 February 2002 15:15 PM
Subject: Re: 1600 rubber engine mounts????

i need these for a L20B into a 1600  - does those mounts let the

motor

sit

low enough so the bonett clear the engine???

thanx

Leighton
----- Original Message -----
From: "Andrew Greenbury" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, February 28, 2002 2:58 PM
Subject: Re: 1600 rubber engine mounts????

Hi Leighton,

Cant you use some from a 180b or 200b or B'bird, therefore get
some at the wreckers?

Andrew

does anyone have any or know where i can get some???


ta

Leighton

--membersozdat-------------------------------------------------------
OZDAT Mailing List   Please Note:-
Send (un)subscribe requests to  [EMAIL PROTECTED]
Send  submissions to  [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/membersozdat@datascribe.com.au/
-----------------------------------------------
----------------------

--membersozdat-------------------------------------------------------

OZDAT Mailing List   Please Note:-

Send (un)subscribe requests to  [EMAIL PROTECTED]

Send  submissions to  [EMAIL PROTECTED]

No unauthorised redistribution of this email

http://www.ozdat.com/ozdatonline/index.htm

http://www.ozdat.com/ozdatonline/listindex.html

http://www.mail-archive.com/membersozdat@datascribe.com.au/

---------------------------------------------------------------------