I'd recommend a DGV style, if you can get a 40mm grab it but there exy. I've had standard carbs, 240K, twin su's and 32/36 dgv's, and they are by far the best all round "cheap" carbs. Su's can give you better top end but they need endless adjustment unless your really lucky with them.
-----Original Message----- From: Ben [mailto:[EMAIL PROTECTED]] Sent: 07 May 2002 07:31 To: [EMAIL PROTECTED] Subject: Re: Single Carb for A87/L20 a DGV is better, but not by much. still just a small downdraft carby. i ran a 36DCD on my l20b for a while, that was getting at least 10km/ltr, where my original carb was getting a bit less than that, plus it had less power ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, May 05, 2002 9:51 PM Subject: Re: Single Carb for A87/L20 > Haven't thought of the 240K. > Does it need new jets or anything to suit the L20? > > It is for the best balance between performance/cost/fuel efficiency/sleeper looks etc.. > Also I haven't had time to re-port the A87 head to suit the twin Hitatchi's that I have. > > I heard about the Weber 32/36 DGAV and was also considering it. > > Nick > > > > From: James Morrison <[EMAIL PROTECTED]> > > Subject: Re: Single Carb for A87/L20 > > Date: 06/05/2002 14:34:43 > > To: [EMAIL PROTECTED] > > > > Have you thought about a 240k carb? is it for performance or just a cheap carb to get the thing going? > > > > James > > > > --- <[EMAIL PROTECTED]> wrote: > > >List, > > > > > >For a laugh, I have (almost) put a new engine into the Stanza. > > > > > >I want to use a single carb. > > > > > >Will the ports on a L20 mainfold be too big for the A87 head? - the ports are tiny. > > > > > >Can I use an L16 manifold? > > > > > >Is it possible to use an L16 carby, i.e are they the same as an L20 when re-jetted? > > > > > >Otherwise I will need a S2 Bluebird carby (with return fitting for electric fuel pump)+ manifold + airfilter. > > >Has anyone got one around the place? > > > > > > > > >Thanks, > > >Nick > > >Sydney > > > > > >This message was sent through MyMail http://www.mymail.com.au > > > > > > > > > > > > This message was sent through MyMail http://www.mymail.com.au > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
