I have the Torana Castor rods, however the 200B arms looked to too long for the Stanza requirements. How much neg camber will 40mm extra length give you?
Ross G
----------
From: [EMAIL PROTECTED]
Reply To: [EMAIL PROTECTED]
Sent: Tuesday, May 7, 2002 12:06 PM
To: [EMAIL PROTECTED]
Subject: Re: Crossmember swap
<<File: reply>>
Sounds like a nice idea!
And the LCA's balljoints will bolt up nicely to an R31 vented strut setup (with different springs and seats).
Can you fit the 300ZX 4 piston calipers on the standard strut or only the R31-GTS?
I thought the Gazelle was power steering?
BTW, I considered 200B LCA's for my Stanza.
Since the inner end is so narrow in the 200B LCA you can shim it forward or backward to give some decent castor and still keep the arm perpendicular to the pivot bolt.
Only problem I had was that the Stanza toe-control arms did not bolt in to the 200B LCA's.
If you have the time to get Torana toe-control arms or modify the 200B LCA's I think it could be a good swap.
We all know how much Datto's need some castor!
Nick
>
> From: "Ross Goddard" <[EMAIL PROTECTED]>
> Subject: RE: Crossmember swap? Craig
> Date: 07/05/2002 11:43:19
> To: <[EMAIL PROTECTED]>
>
> What car is your hillclimb car? What engine.
>
> The other reason for doing this swap would be that it already has mounts for a CA engine.
>
> > ----------
> > From: Craig Coffey
> > Reply To: [EMAIL PROTECTED]
> > Sent: Tuesday, May 7, 2002 6:02 AM
> > To: [EMAIL PROTECTED]
> > Subject: Re: Crossmember swap?
> >
> > I'm working towards it myself, for the hill climb car
> >
> > Craig
> >
> > ----- Original Message -----
> > From: Ross Goddard
> > To: Ozdat (E-mail)
> > Sent: Monday, May 06, 2002 11:36 AM
> > Subject: Crossmember swap?
> >
> >
> > Was at the wreckers on the weekend (anyone on the list own a very clean white 1600 who was at "pick' pay'n go" yesterday? Very neat!)
> >
> > Anyway, was looking at possible lower control arm swaps for my stanza and noticed the the Gazelle might be a good option. LCA seems to be about 15 - 25mm longer which may be good for camber. Then noticed that the whole crossmember might swap into the stanza complete with rack and pinion steering????? May have to shift one bolt hole on the chassis about 20mm.
> >
> > Anyone tried anything like this, and would it work on a 1600 too?
> >
> > Ross G
> >
> >
> > --membersozdat-------------------------------------------------------
> > OZDAT Mailing List Please Note:-
> > Send (un)subscribe requests to [EMAIL PROTECTED]
> > Send submissions to [EMAIL PROTECTED]
> > No unauthorised redistribution of this email
> > http://www.ozdat.com/ozdatonline/index.htm
> > http://www.ozdat.com/ozdatonline/listindex.html
> > http://www.mail-archive.com/[email protected]/
> > ---------------------------------------------------------------------
> >
> >
> > --membersozdat-------------------------------------------------------
> > OZDAT Mailing List Please Note:-
> > Send (un)subscribe requests to [EMAIL PROTECTED]
> > Send submissions to [EMAIL PROTECTED]
> > No unauthorised redistribution of this email
> > http://www.ozdat.com/ozdatonline/index.htm
> > http://www.ozdat.com/ozdatonline/listindex.html
> > http://www.mail-archive.com/[email protected]/
> > ---------------------------------------------------------------------
> >
>
>
This message was sent through MyMail http://www.mymail.com.au
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
