Chris, I did a cut and shut on the gearbox crossmember using some angle iron.I think the 240k uses a thinner mount but i dont know if this works.Some people just use spacers between the g/box crossmember and the floor and use longer bolts.The other switch on the g/box is a neutral switch that is normally connected to an inhibiter switch only allowing it to start in neutral.You dont need this although i used it as i had an automatic wiring.I used a standard 1600 speedo cable from a 70 model.I dont know if they differ in other models.
Chris Simpson wrote: > Stanza has the speedo drive on the passengers side and the electrics on the > drivers side. > > Talking about stanza 5 sp boxes a few questions for anyone that can answer > them dor me. > > 1. mine sits too high and hence touches on the top of the tunnel. Is there > a different mounting block or rubber that is of a lower profile? or will it > be nescessary to space the mount lower? running L20, L16 mounts and std > g/box cross member > > 2. In my box there are two of what looks like reverse light switches, ones > connected up and runs the revers lights, whats the other one for? > > 3. What is the best speedo cable to use with the Stanza box, the input is > on the passenger side? Stanza i would assume. Its an early 1600 with a > long style dash not that that matter i dont think. > > Thanks to who ever can come up with the answers > > Chris > > Terry Rudd writes: > > > The Stumpy mounts the same as the Stanza doggy box so it is a direct swap > > xmemberwise for a 1600 that's already got a doggy fitted. There is a slight > > difference with either the electrics or the speedo drive being on the other > > side, could be both actually (it's a while since I've done a stumpy), but > > it's no big deal. > > > > regards > > Terry > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED]]On Behalf Of Eric > > Sent: Wednesday, 12 June 2002 8:07 PM > > To: [EMAIL PROTECTED] > > Subject: Re: Gearbox question > > > > > > Ben, > > > > Look around for the stumpy 5 speed out of the mid eighties Skyline. It is > > the one that had the 2.4 fuel injected motor. It is pretty close in length > > and he will only have to make up some spacers between the cross member and > > the body. I am assuming that a Stanza is similar to a 1600 in the way the > > gear box is mounted. > > > > Cheers > > > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
