The falcon TB (xf ) are a fair bit bigger than the std FJ one's. I'm using a V8 Commodore TB on my FJ that's also 65mm. >From memory the FJ's TB has a 55mm butterfly and a 60-65 mm opening where the Falcon has a 65mm butterfly My FJ's now making over 400 hp with the setup I have and the Commodore TB seems to be doing the job fine
Cheers Dave > ---------- > From: Terry Rudd > Reply To: [EMAIL PROTECTED] > Sent: Monday, 26 August 2002 5:30 PM > To: [EMAIL PROTECTED] > Subject: RE: Fj20et Throttle bodies??? > > I'm curious about this now - I wonder if Anthony is out there, I'm > thinking > that with over 300hp out the rear his FJ must have whatever TB does the > business on it. > > regards > Terry > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of Leighton Wolfe > Sent: Monday, 26 August 2002 7:14 PM > To: [EMAIL PROTECTED] > Subject: Re: Fj20et Throttle bodies??? > > > nope there a number of people that use the 65 mm throttlebody and the > falcon > ones are definatley bigger > > I have seen them > thanx > > Leighton > ----- Original Message ----- > From: "Terry Rudd" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Monday, August 26, 2002 3:37 PM > Subject: RE: Fj20et Throttle bodies??? > > > > Correct as in at the butterfly - I wasn't dreaming then (-: so what's > the > > deal on the Ford ones - are we sure they're talking turbo FJ, the NA FJ > TB > > is tiny compared to the turbo version. > > > > regards > > Terry > > > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED]]On Behalf Of Leighton Wolfe > > Sent: Monday, 26 August 2002 3:04 PM > > To: [EMAIL PROTECTED] > > Subject: Re: Fj20et Throttle bodies??? > > > > > > i just measured mine and mine is stock and the Internal diametre of the > in > > take hole the throat of the throttle body is approx 70mmm but it > tapers > > in towards the butterlfy mechanism??? > > > > so am i to take it that the 65 mm is measured at the butterfly > opening??? > > > > > > thanx > > > > > > Leighton > > ----- Original Message ----- > > From: "dceptn" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Monday, August 26, 2002 2:40 PM > > Subject: Re: Fj20et Throttle bodies??? > > > > > > > What size throttle bodies do typical hypo-worked FJ20s have? (perhpas > in > > > excess of 500 engine HP) > > > i recently bought a custom plenum, which incorporated in it a 84mm VS > V8 > > > holden TB. > > > ----- Original Message ----- > > > From: "Terry Rudd" <[EMAIL PROTECTED]> > > > To: <[EMAIL PROTECTED]> > > > Sent: Monday, August 26, 2002 4:18 PM > > > Subject: RE: Fj20et Throttle bodies??? > > > > > > > > > > May be mine isn't the original - looks like it's stock though. How > big > > is > > > > the TB on yours? There's a lot of things not stock on mine but the > TB > > > wasn't > > > > something that I was aware of, and there's not a lot of factory data > > about > > > > on the FJt engine to know for sure. > > > > > > > > regards > > > > Terry (lookin' like I could be wrong about this issue) > > > > > > > > -----Original Message----- > > > > From: [EMAIL PROTECTED] > > > > [mailto:[EMAIL PROTECTED]]On Behalf Of Leighton > Wolfe > > > > Sent: Monday, 26 August 2002 1:45 PM > > > > To: [EMAIL PROTECTED] > > > > Subject: Re: Fj20et Throttle bodies??? > > > > > > > > > > > > in the latest zoom there is an FJ20 in a gemini putting out 430kw > at > > the > > > > wheels and it has as one of the noteable mods a 65mm throttle > body???? > > > > > > > > > > > > thanx > > > > > > > > leighton > > > > ----- Original Message ----- > > > > From: "Terry Rudd" <[EMAIL PROTECTED]> > > > > To: <[EMAIL PROTECTED]> > > > > Sent: Monday, August 26, 2002 12:11 PM > > > > Subject: RE: Fj20et Throttle bodies??? > > > > > > > > > > > > > What Tim said, and in any case the stock Nissan TB on a FJT is > 65mm > > OEM. > > > A > > > > > 65mm TB flows a huge amount of air as in FM, I can't remember how > much > > > but > > > > > it is huge. > > > > > > > > > > regards > > > > > Terry > > > > > > > > > > -----Original Message----- > > > > > From: [EMAIL PROTECTED] > > > > > [mailto:[EMAIL PROTECTED]]On Behalf Of Tim > Heibloem > > > > > Sent: Monday, 26 August 2002 10:34 AM > > > > > To: [EMAIL PROTECTED] > > > > > Subject: Re: Fj20et Throttle bodies??? > > > > > > > > > > > > > > > hows it going? > > > > > > > > > > > > > > > i am getting this done to my intake manifold at the moment and i > will > > > show > > > > u > > > > > some pics once its done.. > > > > > > > > > > > > > > > im getting a wedge cut done and moving the TB more towards the > left > to > > > > > ensure better flow from the intercooler > > > > > > > > > > > > > > > the XF falcom TB will fit if u drilled out the holes a bit but > would > > be > > > a > > > > > waste as the flanges are different > > > > > > > > > > > > > > > tim > > > > > > > > > > _________________________________________________________________ > > > > > Chat with friends online, try MSN Messenger: > http://messenger.msn.com > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
