Kris and Andrew I been checking these prices out pretty thoroughly and here is some general info.... Repco sells individual original door and boot locks, all on separate keys, for $35.00 per lock for a standard replacement. They sell solex for $130 per set, not sure how many keys but I think all separate. Super Cheap Autos had some old stock of Solex for $22.00 ea but advise me that the new stock would be about $30.00ea but couldn't supply a boot lock. The locksets coming from Malaysia are original spec and come as a set i.e. 2 doors and a boot lock ON THE SAME key. Final price is not available till they land AT my door but I am expecting to be able to sell them for less than $80.00 per set. What attracted me was the fact that all the locks would be back on one key. Ignition locks are not available from my source and are easily sourced from Subaru? I think Please note that we are talking about 1600 stuff but I am advised that 180B are the same. Hope this helps cheers Mick PS all prices quoted are Plus GST
----- Original Message ----- From: "Kristian Walsham" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, August 29, 2002 7:58 AM Subject: Re: replacing 1600 cylinder locks > Andrew, > No, the full kit. IE: 2 door locks & 1 boot lock. > > Kris. > ----- Original Message ----- > From: "Andrew Greenbury" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Wednesday, August 28, 2002 1:49 PM > Subject: Re: replacing 1600 cylinder locks > > > > Hi Kris, > > > > Is the repco price per lock? > > > > Andrew > > > > > Mark, > > > Repco can get new lock sets( doors and boot) for about $85ish or i > > > bought some solex lock sets for LESS, about $80ish. A bit of a pain > fitting > > > the Solex`s though. > > > > > > Kris. > > > ----- Original Message ----- > > > From: "Mark" <[EMAIL PROTECTED]> > > > To: <[EMAIL PROTECTED]> > > > Sent: Tuesday, August 27, 2002 11:11 PM > > > Subject: replacing 1600 cylinder locks > > > > > > > > > > Hey listers, > > > > What recommendations would you offer to replace cylinder lock in the > > > > doors and boot on my '72 1600? I've heard 200B units need a little mod > > > > to fit. I have heard people saying get Solex replacement locks > (barrels > > > > only?) but a locksmith didn't regard them as suitable for automotive > > > > (insecure, but not much of an issue on a 30 yo car I guess) but the > main > > > > problem is the high costs locksmiths quote ($110+ per lock) so a trip > to > > > > the wrecker would be the way to go if later model parts can be used. > > > > > > > > Mark.JT > > > > > > > > > > > > > > > > > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
