Chris,

R160 = 60mm between the centre to centre of the lower bolts on the back
cover
R180 = 80mm
R200 = 100mm

Which R180? Does it have side axles and the half shafts bolt up to a flange
like a stock R160 out of a 1600, or do the half shafts just slide into the
side.

regards
Terry

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Chris Dorgan
Sent: Tuesday, 3 September 2002 12:58 PM
To: [EMAIL PROTECTED]
Subject: RE: R180 gasket kit?


Terry,

Is the there any markings on the diff that can tell me what sort it is?? ie.
what car it is out of??

Thanks

Chris

--- "Terry Rudd" <[EMAIL PROTECTED]> wrote:
>Chris,
>
>The R180 was in Zeds 240, 260, some 280, Skyline C110 (240K), C210. Not all
>R180 diffs are the same, the 240Z had side axles like a R160, most of the
>others had a trunnion fitting for the half shafts to slide into the side of
>the diff. The rear cover gasket AFAIK is  the same on all of them, and is
>listed for the C210 Skyline PN 38320-U3011 and costs around $20. The seals
>are probably still available from your friendly Nissan dealer or perhaps a
>cheaper solution is to try Consolidated Bearings Co as they just may make a
>kit for them.
>
>regards
>Terry
>
>-----Original Message-----
>From: [EMAIL PROTECTED]
>[mailto:[EMAIL PROTECTED]]On Behalf Of Chris Dorgan
>Sent: Monday, 2 September 2002 9:55 PM
>To: [EMAIL PROTECTED]
>Subject: R180 gasket kit?
>
>
>hi all,
>
>I am in melbourne and wanted to know where I could get a set of gaskets for
>my R180 diff, and how much I would expect to pay?? Also, I forget what cars
>the R180 diff was in, so when I ask the person they may have some idea what
>I want??
>
>Thanks
>

--membersozdat-------------------------------------------------------
OZDAT Mailing List   Please Note:-
Send (un)subscribe requests to  [EMAIL PROTECTED]
Send  submissions to  [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------

Reply via email to