|
hi, to get both wheels to spin with a
non lsd diff, put a wide tyre on the right hand side, abd a narrow tyre on
the left hand side, i did this to a non lsd vakliant and had both wheels
burning rubber..
] mark k
----- Original Message -----
Sent: Wednesday, September 04, 2002 11:05
AM
Subject: Brakes and diff
Hi all,
I have a
200B front brake set up with Metal Kings, standard rear brake set up and a
15/16 master cylinder from a 280ZX that had rear discs. The brake pedal
is pretty firm but doesn`t seem to have a decent bite. I don`t seem to have
"rear lock up".
Is this master cylinder to big/ wrong type(suited to 4WDiscs), if
so, what should i go down to? I
originally got this one as i was going to fit R31 rears but not going to
now.
Also, my rear left
hand wheel will free spin in the wet when i take off a bit harder
than normal or when i turn left, but if i turn right both will either grip
or wheel spin and send me side ways a bit. I`m 99.99% sure i have
a non lsd diff, is this a normal thing for a 1600? I always thought
the right hand wheel should free spin with an open
diff.
Sorry for a long post,
Kris.
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to
[EMAIL PROTECTED]
Send submissions to
[EMAIL PROTECTED]
No unauthorised redistribution of this
email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
--------------------------------------------------------------------- |
