I dont believe that a wide band sensor is suitable for the jaycar digital a/f ratio meter unless you change some of the internals and run one of the oz diy setups. http://www.techedge.com.au/vehicle/wbo2/default.htm
James Fitness wrote: > Hooked up to a factory r32 gtr sensor/probe... > > Any idea what the range is for a wide band one? > > regards > James > > hotkey wrote: > > > ARE you using a WIDE BAND Lamba Probe ? > > -----Original Message----- > > From: "andrew smith" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Date: Monday, September 30, 2002 3:01 > > Subject: Re: Air Fuel Ratio Meters (again) > > > > >James, > > >Thats the limits of the sensor.You could just get it as rich as it reads > > >then go one calibration richer although 11.8 is fine. > > > > > >James Fitness wrote: > > > > > >> Hi All > > >> > > >> Well I recently built a Jaycar A/F ratio meter, the one with the > > >> digital readout as well as LED bar graph... > > >> > > >> the thing works a treat... but only problem is that it's range > > >> maxes out at 11.8:1 at which point the display just says "r" > > >> for rich... and with most turbo cars being tuned at > > >> around the 11.5:1 to 11.8:1 at full throttle, it pretty much > > >> makes it useless for tuning purposes.... > > >> Anybody got any ideas on how to spread the range a little > > >> further? down to 11:1 would be good.. > > >> > > >> Does anybody know if the range of some of the manufactured > > >> gauges is any better? (like the Autometer one or others) > > >> > > >> Cya > > >> James > > >> > > >> -- > > >> ----------------------------------------------------------- > > >> > > >> James Fitness > > >> Director > > >> Data Scribe Australia Pty Ltd > > >> http://www.datascribe.com.au > > >> Computers, Peripherals and Supplies > > >> > > >> Ozdat Online > > >> Webmaster > > >> http://www.ozdat.com > > >> > > > > > > > -- > ----------------------------------------------------------- > > James Fitness > Director > Data Scribe Australia Pty Ltd > http://www.datascribe.com.au > Computers, Peripherals and Supplies > > Ozdat Online > Webmaster > http://www.ozdat.com > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
