Andrew,
Escorts are like that, that if the Alt Bulb is blown (in the dash),
your alt won't work, i thought my alt was stuffed because the light didn;t
work
but it turned out to be the bulb.
the bulb is part of the elect circuit for the alt.

Heath

----- Original Message -----
From: GREENBURY, Andrew Robert <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, October 10, 2002 10:11 AM
Subject: Re: alternator question - SOLUTION!


> Hi list,
>
> Thanks heaps to everyones ideas recently of why my alternator light
> wouldnt go out until the engine revved to 2000 rpm or so. Based on this
> discussion I did some tests on the alternator operation and its wiring
> (its a bosch IR alternator, replacing a lucas internally regulated alt the
> PO had wired up, with the external reg removed).
>
> It turns out the problem was the actual indicator light!! It appears the
> alt requires an indicator globe of sufficient current draw/wattage to be
> connected, perhaps to tell the alternator circuit that the engine is about
> to be started. Without this initial current draw of sufficent size (about
> .2A) when turning the key, the alt doesnt "know" the engine is on, so the
> alternator doesnt kick in, and the light stays on. But then you hit 2000
> rpm and this must be a failsafe trigger to turn on the alternator, for
> example, when the indicator light blows.
>
> I had no idea the actual light would have any effect on an alternators
> operation, so it never occured to me to mention I had been playing
> around with replacing my warning lights with LEDs! It turns out because
> the LED draws 1/20th of the current of the globe, the alternator didnt
> know the engine had been turned on until it hit 2000 rpm as above.
>
> So for those whos alternators are doing the same, check that the indicator
> light wire to be the back of the alternator is of a good connection, same
> at the connection to the instrument panel, and that the globe hasnt been
> changed to a lower wattage (at least 2W).
>
> Thanks for the help and sorry for the length
> Andrew
>
>

--membersozdat-------------------------------------------------------
OZDAT Mailing List   Please Note:-
Send (un)subscribe requests to  [EMAIL PROTECTED]
Send  submissions to  [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------

Reply via email to