Mark, You'll need a sender for a Niles gauge. 1600/1200/180B/Imported early 200B are the same, could be others. REPCO have them new, usually find one at the wreckers, can be tough to get out without crunching them, take the correct size ring spanner (17mm). Late 200B and on (Aussie) have VDO gauges and that sender is not suitable for a 1600.
regards Terry -----Original Message----- From: [EMAIL PROTECTED] [mailto:membersozdat_owner@;datascribe.com.au]On Behalf Of Mark Firman Sent: Sunday, 27 October 2002 8:06 PM To: [EMAIL PROTECTED] Subject: temp sender I think i have a dodgy temp sender. when I earth the wire from the temp sender the guage reads HOT, so i think the guage works, only my temp sender doesn't. Where can i get a new one? or is there some way of fixing it? By the way its for an L20B in a 1600. Cheers, Mark _____________________________________________________________ Get Your free Ozdat Email Account ---> http://www.ozdat.com _____________________________________________________________ Select your own custom email address for FREE! Get [EMAIL PROTECTED] w/No Ads, 6MB, POP & more! http://www.everyone.net/selectmail?campaign=tag --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/membersozdat@;datascribe.com.au/ ---------------------------------------------------------------------
