Z20 block Z24 crank (lightened and nitrided) ARGO custom billet rods APEP custom forgies then got it all balanced to within a bee's knob from perfection
it all adds up so quickly before you even realise how much money you've spent. A lot more still to go will be running a GT35/40R, with around 8.8 8.9ish :1 compression and a little over 20psi long as I can get enough fuel to it (part I'm upto now) it should go quite well. haven't decided on management yet.....was thinking E6K but with the microtech being so much cheaper and plenty of cars dipping in to the 10's with them it's definately something I'll consider to save a bit of dosh. The whole thing is at least another 6 months off, not rushing it. But I've just ordered a Z18ET top end from Errol for my girlfriends 200B which should keep my boost bug in check till mine's done Dave ----- Original Message ----- From: "David Andrews" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, November 12, 2002 1:38 PM Subject: Re: Injectors > Yes Yes. Details please. > > >>>>>>>>>>>>>>>>>> Original Message <<<<<<<<<<<<<<<<<< > > On 11/12/02, 1:38:46 PM, Bob <[EMAIL PROTECTED]> wrote regarding Re: > Injectors: > > > > Is this going on some sort of L/Z hybrid? (just guessing from some of > > your previous posts) > > > Tuesday, November 12, 2002, 1:29:56 PM, you wrote: > > > DC> I've spent $7k on the bottom end so far with a lot more to go....still > got > > DC> the fuel system to go :( big $$$ for the fuel pumps etc I want :( > > > DC> Dave > > DC> ----- Original Message ----- > > DC> From: "Daniel Kroehn" <[EMAIL PROTECTED]> > > DC> To: <[EMAIL PROTECTED]> > > DC> Sent: Tuesday, November 12, 2002 11:30 AM > > DC> Subject: Re: Injectors > > > > >> I gathered that, but how much and what from? > > >> > > >> Daniel Kroehn > > >> > > >> ----- Original Message ----- > > >> From: "David Hirst" <[EMAIL PROTECTED]> > > >> To: <[EMAIL PROTECTED]> > > >> Sent: Tuesday, November 12, 2002 9:39 AM > > >> Subject: RE: Injectors > > >> > > >> > > >> > I think he wants horsepower !!! > > >> > > > >> > > ---------- > > >> > > From: Daniel Kroehn > > >> > > Reply To: [EMAIL PROTECTED] > > >> > > Sent: Tuesday, 12 November 2002 7:31 AM > > >> > > To: [EMAIL PROTECTED] > > >> > > Subject: Re: Injectors > > >> > > > > >> > > May I ask what the hell are you planning to do with that much fuel? > > >> > > > > >> > > Daniel Kroehn > > >> > > > > >> > > ----- Original Message ----- > > >> > > From: "David Hirst" <[EMAIL PROTECTED]> > > >> > > To: <[EMAIL PROTECTED]> > > >> > > Sent: Tuesday, November 12, 2002 9:11 AM > > >> > > Subject: RE: Injectors > > >> > > > > >> > > > > >> > > > Or ofcourse the 12a 6 port injectors that are 1200cc's !! > > >> > > > > > >> > > > > ---------- > > >> > > > > From: mark krawczuk > > >> > > > > Reply To: [EMAIL PROTECTED] > > >> > > > > Sent: Tuesday, 12 November 2002 6:32 AM > > >> > > > > To: [EMAIL PROTECTED] > > >> > > > > Subject: Re: Injectors > > >> > > > > > > >> > > > > hi, i`ve had a bit of look on the net, and the size of the 12 a > > >> > > > > injectors > > >> > > > > vary from 800 to 880 cc. > > >> > > > > mark k > > >> > > > > ----- Original Message ----- > > >> > > > > From: "David Hirst" <[EMAIL PROTECTED]> > > >> > > > > To: <[EMAIL PROTECTED]> > > >> > > > > Sent: Tuesday, November 12, 2002 8:04 AM > > >> > > > > Subject: RE: Injectors > > >> > > > > > > >> > > > > > > >> > > > > > David > > >> > > > > > Have you considered using rochester (800cc) injectors.12a turbo > > >> > > > > injectors > > >> > > > > > are rare and old !! not to mention very expensive.. > > >> > > > > > Rochesters are good and would be cheaper too I'd say, you can > > DC> get > > >> > > them > > >> > > > > for > > >> > > > > > around $200 each from the right place and their new !! > > >> > > > > > Cheers > > >> > > > > > Dave > > >> > > > > > > > >> > > > > > > > >> > > > > > > ---------- > > >> > > > > > > From: David Costello > > >> > > > > > > Reply To: [EMAIL PROTECTED] > > >> > > > > > > Sent: Monday, 11 November 2002 1:02 PM > > >> > > > > > > To: [EMAIL PROTECTED] > > >> > > > > > > Subject: Re: Injectors > > >> > > > > > > > > >> > > > > > > I thought they were 780cc, but yeah I need em big, need around > > >> > > 150hp > > >> > > > > per > > >> > > > > > > cylinder worth of fuel > > >> > > > > > > > > >> > > > > > > Dave > > >> > > > > > > ----- Original Message ----- > > >> > > > > > > From: "Rhys McGhee" <[EMAIL PROTECTED]> > > >> > > > > > > To: <[EMAIL PROTECTED]> > > >> > > > > > > Sent: Monday, November 11, 2002 2:46 PM > > >> > > > > > > Subject: Re: Injectors > > >> > > > > > > > > >> > > > > > > > > >> > > > > > > > >From memory i think they are a dark green bosch style > > >> injector, > > >> > > are > > >> > > > > you > > >> > > > > > > sure > > >> > > > > > > > you need them that big (880cc) as they are rare therefore > > >> > > expensive? > > >> > > > > > > > > > >> > > > > > > > > > >> > > > > > > > > > >> > > > > > > > > > >> > > > > > > > > > >> > > > > > > > > > >> > > > > > > > >From: "David Costello" <[EMAIL PROTECTED]> > > >> > > > > > > > >Reply-To: [EMAIL PROTECTED] > > >> > > > > > > > >To: <[EMAIL PROTECTED]> > > >> > > > > > > > >Subject: Injectors > > >> > > > > > > > >Date: Mon, 11 Nov 2002 12:34:27 +1000 > > >> > > > > > > > > > > >> > > > > > > > >Anyone got, or know of, some 12a Turbo injectors for sale? > > >> > > > > > > > > > > >> > > > > > > > >also does anyone know what markings should be on the 12aT > > >> > > injectors > > >> > > > > so > > >> > > > > > > I > > >> > > > > > > > >know what to look for when buying them > > >> > > > > > > > > > > >> > > > > > > > >Dave > > >> > > > > > > > > > > >> > > > > > > > > > >> > > > > > > > > > >> > > > > > > > > > >> > > _________________________________________________________________ > > >> > > > > > > > Add photos to your e-mail with MSN 8. Get 2 months FREE*. > > >> > > > > > > > http://join.msn.com/?page=features/featuredemail > > >> > > > > > > > > > >> > > > > > > > > > >> > > > > > > > > >> > > > > > > > > >> > > > > > > > > >> > > > > > > > >> > > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > >> > > > > > >> > > > > > >> > > > > >> > > > > >> > > > > >> > > > > >> > > > >> > > > >> > > >> > > >> > > > > > > -- > > Best regards, > > Bob mailto:rcs07@;uow.edu.au > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/membersozdat@;datascribe.com.au/ ---------------------------------------------------------------------
