hi, either weld patches over the holes, or cut out the floor, and weld some plate in, or see if you can get a floor section from another 1600. i would opt for welding some plate in. mark k ----- Original Message ----- From: "Keith Gillan" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, January 12, 2003 2:00 PM Subject: Floor Plan
> Hey list, > > I was just e-mailing to see if one of u could help me out or give me some advice. > > I'm in the process of doin up a 1600 and after it came back from the panel beater i relised it had rust in the front drivers side floor. The rust covers from the seat mount to the front. It only has a few has a few holes about the size of a 10 cent piece but the metal thats left is thin and week. > > What should i do? > > Keith > > _____________________________________________________________ > Get free email for life---> http://www.carjunky.com > > _____________________________________________________________ > Select your own custom email address for FREE! Get [EMAIL PROTECTED] w/No Ads, 6MB, POP & more! http://www.everyone.net/selectmail?campaign=tag > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
