hi, there is a filler plug about in the middle of the side of the gearbox, could be a recessed square hole, or a square bit that sticks out, onto which u put a shifter or if its a recessed hole , some times a 1/2 inch ratchet bit will go in.
undo this nut thing, and keep pumping oil in thru this hole untill the oil starts to come back out.........then its full. mark k ----- Original Message ----- From: "Robert Charles Scealy" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, September 24, 2003 11:55 AM Subject: Gearbox Woes > Hi All, > > There really seems to be something wrong with my gearbox, it is doing > this crazy grinding thing that left me stranded in an intersection > yesterday. Took off in 1st, foot on clutch, go to shift into second and > the stick moved into the second position, but the box started doing this > crazy grinding noise - I go straight back to neutral, and no matter what > gear I go into it kept doing it until I came to a stop, foot off the > clutch in neutral, and then it would let me shift normally. This morning > it seemed to jump out of first as well. I have just put a new clutch in, > but it used to do this a little bit before then, just not as bad. Also I > have changed the oil with a 50/50 mix of 75/90 oil and auto fluid, put > in about 2 litres. How do I know when there is enough oil in the > gearbox? > > Regards, > Bob > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[EMAIL PROTECTED]/ ---------------------------------------------------------------------
