Turn the bracket around. If you are using standard Skyline/Pintara brackets you will need to modify them a bit, they don`t bolt up to the flat side of the bracket, instead the lipped side goes against the A arm and the flat side towards the disc.
When you fit them you will see where they interfere with the A arm and you need to grind the sections out of the bracket to make them fit. Hope this makes some sense as i`m really tired. Kris. ----- Original Message ----- From: "Tim Heibloem" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, October 04, 2003 8:31 PM Subject: 510 Rear Disk - R31 Caliper Brackets > hows it going guys? > > i just have a question about the R31 rear disk conversion most of you have > probably already done.. > > i have the r31 bracket now on the a-arm, but the rotor fouls the bracket > when its placed on the hub > > do i need to grind it back to get clearance? > > thanks in advance > > > tim > > _________________________________________________________________ > Chat via SMS. Simply send 'CHAT' to 1889918. More info at > http://ninemsn.com.au/mobilemania/MoChat.asp?blipid=6800 > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[EMAIL PROTECTED]/ ---------------------------------------------------------------------
