While your at it Mal, could you send that replacement 810SSS speedo and lense? You said you would, so either you are a man of your word or you are not. It is unfortunate that I must discuss this matter publicly, but I had purchased the item in good faith yet discovered the trip meter would not reset and a huge crack in the lense. This was not visible in the Ebay photo nor were any defects mentioned. The packaging was in excellent condition so let's not use the NZ Post excuse. I've already reminded you twice about this matter. You can pop it in the same package that you use to send the oil senders to Rick to save postage and I'll get it off him here in Perth. Stupidly I gave you positive feedback on Ebay, thinking that a fellow Ozdatter would stick by their word. I am beginning to regret that. If you need reminding read the message you sent below, 6 months ago.
Rob P ----- Original Message ----- > From: "maldat" <[EMAIL PROTECTED]> > To: "Rob P" <[EMAIL PROTECTED]> > Sent: Thursday, November 20, 2003 4:35 AM > Subject: Re: Question for seller -- Item #2439552919 I'll have a look to see if I can find anther glass/plastic cover for the speedo ,,its a 810sss piece and I'm sure the glass cover was too because of the trip meter reset hole... I'm blown away the reset dont work,,I would not have done built/played with it if it was shit..Lets blame the NZ post and I'll ask for some refund for the post shop,was the box in good shape when you got it?. That unit came up one day sitting in my garge ,,I thought id see if 810SSS gauges fit in a 510 housing,, I painted all the needles to match bolted it all up and never got around to sorting the rest out, I thoink not long after that I brought the bike shop and never had time to do much else. Malcolm ----- Original Message ----- From: "maldat" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]> Sent: Monday, April 19, 2004 3:09 PM Subject: Re: ebay crap... > Yes , > Now I do remember a oil sender for you,did you want one with two wires off > it or one. > > For the trouble I'll send you two just in case one lecks(but shouldnt).I'd > like to think i only keep the good parts of wrecked out cars, as who whats > rubbish around?. > The later ones with the rubber cover have it so it can leck for longer > before you notice it. > > Its the USA $ thats crap. and the ozzie is too. The New Zealand dollar is > stronger,went up all the war thing started(Lets not go their)..$1nz = > $0.68usd or $0.90a..(aboutish) > > 2472962735 is the link that looks fine,but where is the top half of the air > ducts? > Check the Quickskins last price list , If I remember right the 510 Race > spoiler was around $245USD, When I got mine the exchange rate was around $1 > = $0.46USD..Plus shipping,Import tax and GST. (work that out, about $850nz) > Cost me around $600 to get the mould made, Plus each spoiler does cost. > They would have been $100+ cheaper with out the air ducts.. > Mine arnt a back yard boat builders fiberglass product, In fact better than > the Quickskins unit which came from the USA. > > Thanks > Malcolm > ----- Original Message ----- > From: "Rick White" <[EMAIL PROTECTED]> > Cc: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> > Sent: Monday, April 19, 2004 8:18 PM > Subject: Re: ebay crap... > > > > Malcolm > > Just goes to show how wrong some people can be hea?? > > > http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&category=42606 > > &item=2472962735&sspagename=STRK%3AMEBWA%3AIT > > > > That looks to me to be only$81.00 U.S > > either the U.S. Dollar has taken off really bad since I last checked, or > the > > New Zealand Dollar has plummeted. > > > > Unlike some people here, us Aussies help each other out. > > I would rather give someone who helps me out cash than to give it to > people > > who overcharge. > > I also wouldn't rip you off by buying one of you and then having copies > made > > (That would be ripping you off) > > > > $270.00 New Zealand + shipping damm I don't want shares in your bike shop > > mate. > > Damm > > > > P.S. I thought as I helped you get front door handles through Nissan here > in > > Perth, (9+ months ago) you were going to send me that oil pressure > sender?? > > Even that didn't happen. > > Goes to show who you should help out hea?? > > > > Later. > > Rick White. > > ----- Original Message ----- > > From: "maldat" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Tuesday, April 13, 2004 2:14 PM > > Subject: Re: ebay crap... > > > > > > > Yes I have brand new BRE #46 front dams.... > > > > > > But its over 1 metre long so will cost a bomb to post..Just over ,by the > > > time its boxed up anyway. > > > If I cut it in the middle shipping is dead easy and cheap then all you > > have > > > do to is glue a sheet of thinn panel steel on the back of it couple of > pot > > > rivets and a dash of bog and your back in one peice. > > > > > > Let me know they are $270nz + shipping.(works out cheaper than the USA ) > > > You only need to buy one then get a mold made and your in. > > > Malcolm > > > > > > > > > ----- Original Message ----- > > > From: "Michael S. Burke" <[EMAIL PROTECTED]> > > > To: <[EMAIL PROTECTED]> > > > Sent: Tuesday, April 13, 2004 9:35 AM > > > Subject: Re: ebay crap... > > > > > > > > > > Rick, > > > > > > > > Malcolm in New Zealand was making or selling some...perhaps he can > > > > hook you up. > > > > > > > > Mike B. > > > > Malcolm...! > > > > > > > > > Once again we in Perth, Australia do not get a chance in even > bidding > > > > on > > > > > these BRE Spoilers, as for some reason they people who make them > will > > > > only > > > > > deliver locally. > > > > > Grrrr. > > > > > You have to hate that. > > > > > Ohh well, one day I might personally fly over to the states and pick > > > > one up. > > > > > Later. > > > > > Rick White. > > > > > ----- Original Message ----- > > > > > From: "John Roper" <[EMAIL PROTECTED]> > > > > > To: <[EMAIL PROTECTED]> > > > > > Sent: Monday, April 12, 2004 9:06 AM > > > > > Subject: ebay crap... > > > > > > > > > > > > > > > > Not a big fan of people who pirate other people's photos > > > > > > to sell their product... > > > > > > > > > > > > http://cgi.ebay.ca/ws/ebayISAPI.dll?ViewItem&item=2472962735 > > > > > > > > > > > > Looks like a decent product, but I would prefer to deal > > > > > > with someone a bit more honest. > > > > > > > > > > > > FYI, When asked about him using my photos without permission > > > > > > he couldn't understand why I wasn't flattered that he used > > > > > > my car to whore his product... > > > > > > > > > > > > John P. Roper Photography > > > > > > [EMAIL PROTECTED] > > > > > > ph. 817-229-8329 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[EMAIL PROTECTED]/ ---------------------------------------------------------------------
