use holden stud sealer and paint all of both sides of the gasket in a thin even layer. andrew
--- "mark krawczuk" <[EMAIL PROTECTED]> wrote: hi, either, some stuff called "motor seal" which is made by wurth, i THINK repco sell it, VERY expensive but VERY good. there is aome silicone called " three bond" cant remember who sells that though. i am not sure but ., i also think loctite "master gasket" can be used... mark k ----- Original Message ----- From: Leighton Wolfe To: [EMAIL PROTECTED] Sent: Monday, May 31, 2004 10:54 AM Subject: Copper Head asket sealant? What is the best stuff to use for sealing up around oil and water hole when using a copper head gasket? the instructions that come with the gasket just say to use a sealant around the oil and water holes?? - i bought some stuff from bursons but on the back of the tube it says it is not suitable for head gaskets but im not sure if that means normal head gaskets or any head gaskets please help thanx Leighton --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[EMAIL PROTECTED]/ --------------------------------------------------------------------- _____________________________________________________________ Get Your free Ozdat Email Account ---> http://www.ozdat.com --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[EMAIL PROTECTED]/ ---------------------------------------------------------------------
