well we allowed to do it but then again i will be put in a different class.i wana race
in class b which is 1301cc - 1600cc.that is with a atmo eng.any other ideas.
-----Original Message-----
From: Cleary Signs [mailto:[EMAIL PROTECTED]
Sent: Tuesday, July 06, 2004 3:40 PM
To: [EMAIL PROTECTED]
Subject: Re: z20 and z 18
Mohit,
are you allowed a turbo or Nitrous Oxide,
these will give you the best performance per $
heath
----- Original Message -----
From: "Mohit K. Autar" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, July 06, 2004 6:21 AM
Subject: RE: z20 and z 18
Hi terry,
well im in fiji.i race a datsun 1400 with a L16 eng,twin solex,mild
cam,4.1:1 locked diff,2" open exhaust.i did 16.81sec in the last 1/4
mile.our next race is on the 25th of this month.
i will run my car as is this time but for the august race im doing up
another L16 eng up.this time i wana use a better cam and ported head,will
try to increase the CR as well.
is there any tips you can give to me or anyone out there who has any ideas
so i can do a better time.
just yesterday i friend of mine called me and said that he has a zoom mag
and a atmo datsun with a l16 eng does 14.6sec for the 1/4.
ok then im in urgent help.any ideas pliz.
-----Original Message-----
From: Terry Rudd [mailto:[EMAIL PROTECTED]
Sent: Monday, July 05, 2004 9:54 PM
To: [EMAIL PROTECTED]
Subject: RE: z20 and z 18
A L16 with a Z18 head wouldn't go real well in NA form - CR is around 7.8:1
with stock pistons and you may scrape in 8.8 with flat tops. As Malcolm
said, great for a hair drier. They go great on a L20B engine but you need a
Z20 timing cover.
regards
Terry
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of maldat
Sent: Monday, 5 July 2004 5:01 PM
To: [EMAIL PROTECTED]
Subject: Re: z20 and z 18
I belive so.
you have to use the Z front timming cover but why??
Z engines are a detuned L engine's. hence the turbo ,, thats the only way
to get any power from them.
Malcolm
----- Original Message -----
From: "Mohit K. Autar" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, July 05, 2004 10:13 AM
Subject: RE: z20 and z 18
hi guys,
can the z18 head fit to a l16.did anyone try it.
-----Original Message-----
From: mark krawczuk [mailto:[EMAIL PROTECTED]
Sent: Saturday, July 03, 2004 12:02 PM
To: [EMAIL PROTECTED]
Subject: z20 and z 18
hi, can a z20 head gasket be used on a z18?
i have a z20 gasket but not quiet sure about some coolant passages though ?
any modifying to do?
mark k
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[EMAIL PROTECTED]/
---------------------------------------------------------------------
This email and any files transmitted with it are confidential and intended solely for
the use of the individual or entity to whom they are addressed. If you have received
this mail in error, please notify the System Administrator. Please note that any views
or opinions presented in this mail are solely those of the author and do not
necessarily
represent those of the Institute. Finally the recipient should check this mail and any
attachment for the presence of viruses. FIT has a virus detection in place and makes
every reasonable effort to ensure that this message is free from viruses. FIT accepts
no liability for any damage caused by any virus transmitted by this mail
