Zac, It will still work as well if the mount bolts are tight. Cheers Feral Errol www.datrats.com.au
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Zac Campbell Sent: Sunday, January 30, 2005 5:11 PM To: [email protected] Subject: Strut brace Howdy, I got given an aftermarket 1600 strut brace on Friday. Today I test fit it and found that the inner side of the plate that rests on the strut tower rubs against the centre of the strut tower and won't sit flat. Does that make any sense? Are you supposed to put washers between the strut tower and the brace? This would fix the problem but I thought it might negate some of the benefit as the brace wouldn't be sitting flush on the tower. Thoughts? --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [email protected] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ --------------------------------------------------------------------- --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [email protected] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
