Crap, I didn't write that overly well. Option 1, all i have is the R200 sitting there. Not the CV setup, so I would need to sort out some 280zx R200 axles for that yes?
Dave On Wed, 2005-05-04 at 12:26, David Andrews wrote: > Needs tuning (only running gate pressure atm: 5psi). But stupid me wired > up the autronic wideband incorrectly when I was trying it. So still need > to do that. > > Which leads me onto another topic, my half shafts. I have a couple of > options: > > 1 - install the R200 LSD sitting there with CV axles. Will require > modification to my tail shaft (different flange), or change diff flange > I suppose? > > 2 - install a R180 locker and get some hardy-spicer unis installed in > the existing half-shafts as a temporary measure until I get a RB25DET > box in there, at which time the R200 LSD will go in. > > I know option 1 is the better of the two, and it is the eventual goal, > but I've just got this thing on the road and shat a uni already (atleast > thats what I think the problem is, loud arse clunk on power on/off). At > this point I just want to be able to drive it while I collect my dosh > for the R200/CV/RB25DET gearbox conversion. > > Suggestions/thoughts? > > Dave > > On Wed, 2005-05-04 at 02:05, Chris King wrote: > > Thats nice, and i really like the look of that intercooler, nicely made! > > > > Is it all finished now? > > > > Chris > > ----- Original Message ----- > > From: "David Andrews" <[EMAIL PROTECTED]> > > To: <[email protected]> > > Sent: Wednesday, May 04, 2005 9:41 PM > > Subject: RE: New (old) member > > > > > > > Excellent! If anyone is interested, here are some pics of what I have > > > been up to (while my 16 is in the panel beaters, still): > > > > > > http://thehelix.homelinux.net/pictures/240z-turbo/engine-bay-front.jpg > > > http://thehelix.homelinux.net/pictures/240z-turbo/engine-passengers-side.jpg > > > > > > Dave > > > > > > On Wed, 2005-05-04 at 01:18, Geordie wrote: > > >> Coming thru loud and clear > > >> > > >> > > >> -----Original Message----- > > >> From: David Andrews [mailto:[EMAIL PROTECTED] > > >> Sent: Wednesday, 4 May 2005 8:56 PM > > >> To: [email protected] > > >> Subject: New (old) member > > >> > > >> > > >> Guys, > > >> > > >> If this works then I'm back from the wilderness. I haven't posted here > > >> for a > > >> long.. long.. loooonnngg time (and never with anything useful) as the > > >> email > > >> address I send from cracked it with me. But I think I fixed it. :D > > >> > > >> Fingers crossed, > > >> > > >> Dave > > >> > > >> > > >> --membersozdat------------------------------------------------------- > > >> OZDAT Mailing List Please Note:- > > >> Send (un)subscribe requests to [EMAIL PROTECTED] Send > > >> submissions to [email protected] No unauthorised > > >> redistribution of this email http://www.ozdat.com/ozdatonline/index.htm > > >> http://www.ozdat.com/ozdatonline/listindex.html > > >> http://www.mail-archive.com/[email protected]/ > > >> --------------------------------------------------------------------- > > >> > > >> > > >> > > > > > > > > > > > > __________ NOD32 1.1087 (20050503) Information __________ > > > > > > This message was checked by NOD32 antivirus system. > > > http://www.nod32.com > > > > > > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [email protected] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
