|
----- Original Message -----
From: Rosie Nobile
Sent: Wednesday, August 03, 2005 11:31 PM
Subject: Re: trans coolers don't know if this message was directed at me by
mistake or not but will let you know what I know from my own experience. You
should be able cool enough with only one cooler. There are some big ones
available. Plumb it up so that the trans fluid enters at the bottom fitting on
the cooler and the return line to gearbox exits st the top. This was the fluid
gets best exposure to cooling air as the fluid following is pushing it through
the cooler it is not just flowing through however it likes. Good luck hope this
helps. Also forgot to mention if you can, mount the cooler on an angle sloping
forward at the top this increases the amount of air exposed to the cooling fins.
Dave
--membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [email protected] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ --------------------------------------------------------------------- |
No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.10.20/95 - Release Date: 9/09/2005
