Hello, I played a bit more with the phone and eventually ssh'ed into the phone to check the log file for XDM. This is what is says: [ 280.961] (EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device [ 280.992] (EE) PreInit returned 8 for "TSC2005 touchscreen"
Obviously, something is going wrong with the X-window configuration, but I couldn't find any .rpmsave or .rpmnew files which would explain this behavior, nor wasn't I able to find a solution through google. Since this behaviour is reproduceable (recent N900 meego relase on sd card, zypper refresh, zypper update) I hardly doubt I'm the only one running into trouble and I would really be happy if anyone could point me to a solution. Thanks, Chris On Tue, Oct 23, 2012 at 8:29 PM, letters.random13 < [email protected]> wrote: > i have regularly had the same problems: a direct install works > (mostly...now...), but an update (i use console, zypper refresh; zypper > update) may or may not complete successfully, but subsequent reboot mostly > never succeeds; no clear indication why not. latest failed update attempt > was with > nemo-handset-armv7hl-n900-0.20120920.1.NEMO.2012-10-07.1-mmcblk0p.raw.bz2 > (initial install works ok). > i don't think those console msgs are directly related, but i haven't tried > to recover dmesg to see what happened. > to minimize frustration, i just do a clean install of a recent release; > then select updates sparingly, if at all. > > > > On Sun, Oct 21, 2012 at 9:12 PM, Chris Mailer < > [email protected]> wrote: > >> Hello, I installed the Nemo October release on my N900 SDcard). >> Booting via uboot works fine after installation. Once the device came >> up, I noticed Nemo was really slow, even after reboot. I therefore >> decided to check for updates, and after refreshing cache there were >> 237 updates applicable. >> I run the update until it said "finished". >> I noticed most of the icons had changed, but the programs wouldn't >> start any longer - and I decided to reboot the Phone. However, the >> Phone seems to hang after reboot now, with messages like: "hci_h4p FW >> error" and i2c omap controller timed out". >> While I cut mount the Fat32 part of the MMC in Maemo that did but work >> for the ext4-part. The Fat32 part looks ok, though. >> Do I need to install the power kernel, or what can I do to resurrect >> my Nemo-release? >> Thank you in advance, >> Chris >> >> >> >
