We know it is not a V-6.? for sure, it will need new valve guides, valve grind, seals and springs.? You can figure $500 for head work at a good machine shop.? Lots of work, leak may have hydrauliced a cylinder and bent a rod.?
Jim in Phoenix -----Original Message----- From: Robert Rentfro <[EMAIL PROTECTED]> To: 'Mercedes Discussion List' <mercedes@okiebenz.com> Sent: Mon, 28 Jul 2008 7:46 am Subject: [MBZ] PHX CL 300E Needs head gasket You reckon there is more to this then reads here? http://phoenix.craigslist.org/cph/car/772316067.html Is "changing the head gasket" a DIY task, or is the head probably toast? Bob R _______________________________________ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com _______________________________________ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com