You generally unscrew the armrest, the latch handle bits (under a little
plastic insert that will pry off), and the chrome thing at the latch,
then pull the bottom and sides of the panel off (those little snap
things are in there), then lift the panel straight up as there are tabs
at the top that fit over the door/window structure, and maybe another
tab or two in there somewhere. Then the plastic peels off. Window
switches generally pop out or there might be a screw there somewhere, I
can't remember. Disconnect the connector.
I think it's called a check strap, I have not replaced one but have to
some day. You might need a couple extra joints in your arm to reach up
in there.
Also a good time to lube up the window tracks and slides, clean it all
well first. I use white lithium grease but there is probably some magic
Benz potion for them.
--R
Angelo Giaimo wrote:
Got to replace the that device that holds the door open. (Don't know it's
official name, but I had one lying around from when it first started acting
up.). So the door panel gotta come off.
Anyone have the proccedures to r/r the panel and the regulator they could
email me? PDF files are fine.
Thanks,
Angelo Giaimo
[email protected]
1990 350SDL 276K miles.....and still ticking.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://okiebenz.com/pipermail/mercedes_okiebenz.com/attachments/20090914/7ee8217d/attachment.html>
_______________________________________
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
_______________________________________
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
