Rusty - how much for a new CC switch (1983 123 turbodiesel) ?
On 10/20/05, Marshall Booth <[EMAIL PROTECTED]> wrote: > > Anthony Galioto wrote: > > My cruise control handle/lever came cleanly out of the switch. I tried > > putting it back with JB Weld. That held for about 10 pulls on the lever > then > > came out with the JB attached. It came cleanly off the lever and did not > > remain in the switch. It als came off the lever with my nail. Is there > > anything that can hold the two parts together and withstand the movement > of > > the lever? Does anyone have any experience with this problem? > > Thanks --Anthony > > I know of NO reliable repair except to replace the switch. Not sure > about 123s, but there are three different switches used on 201s (and > they were NOT interchangeable). > > Marshall > -- > Marshall Booth Ph.D. > Ass't Prof. (ret.) > Univ of Pittsburgh School of Medicine > Department of Pharmacology 1300 BST > Pittsburgh PA 15261 USA > [EMAIL PROTECTED] > > _______________________________________ > For new parts see official list sponsor: http://www.buymbparts.com/ > For used parts email [EMAIL PROTECTED] > > To Unsubscribe or change delivery options go to: > http://striplin.net/mailman/listinfo/mercedes_striplin.net >