On Wed, Jul 3, 2013 at 7:58 AM, Benz Hogs <benz-n-h...@gulseth.net> wrote:
> My version of that would be such: > (new modification for easier use) > 2" 1/4-20 bolt > 1" or 1-1/8" fender washer > 1" PVC cap with hole drilled for 1/4 bolt > 1/4-20 nut > > Instructions: > place fender washer on bolt followed by new shifter bushing. Slide bolt > through bushing opening on the shifter arm. Place PVC cap and 1/4-20 nut > onto end of bolt to create a sandwich around the shifter arm. The idea is > that tightening the bolt/nut will push the bushing into the arm. The PVC > cap creates space where the bushing can be pushed by straddling the opening. > > Is that more clear? > > > Yes, very! Thanks. I'll make one of those next time I have to do the job. Alex _______________________________________ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com